hey the shop i deal with has a bunch of stuff they are trying to get rid of. i got a list of some of the stuff they have here. If your interested in anything, send an email to the shop, the email address is [email protected] its also listed below with the phone number.
mitsubishi roller is sold, still have engine and trans. make me an offer on one or both!
i have a rebuilt engine that will be sold separately for $2750
the transmission can go for $1250
make an offer on all this stuff.
http://i674.photobucket.com/albums/vv107/perrace/forsale/mits30e.jpg
http://i674.photobucket.com/albums/vv107/perrace/forsale/mits30.jpg
=========================================
Set of eight (8) Jesel Exhaust rockers for use in Brodix canton valve type head
these were used on an engine on our engine dyno for less then an hour.
stamped number on the bottom is CQGR70
ONLY EXHAUST
$email me
=========================================
=========================================
hitachi Racing Starter SBFord 221-351w PP102
$125
=========================================
=========================================
stock used parts:
1996-1998 Ford Mustang DOHC 4v Cobra 8 bolt flywheel
Used, Nodular 8 bolt flywheel OEM, part # RF-F6ZR-6380-BB
needs to be resurfaced, i can have it done if you want.
$75 as is, $140 surfaced.
=========================================
Ford 306CI longblock: pictures show valve covers, intake and oil pan, DOES NOT INCLUDE VALVE COVERS, INTAKE, OILPAN OR PICKUP)
It does include the timing cover, harmonic balancer, and flexplate.
Rods: stock ford
Pistons: Probe flattop pistons
Bolts: ARP
Heads: World Products Heads (p/n 710032 casting number I-057 W J/R) See tech specs below.
Cam: Elgin Industries (see specs below) (according to World Products they are the same casting as the Iron windsor jr heads they currently list on their site, but they are aluminum)
Head Technical Specs:
Casting ID Number: I-058
Material: High density cast iron
Valve Seats: Intake (integral), exhaust (hardened)
Valve Guides: Integral cast iron
Spring Seats: Machined for 1.560" and 1.250"
Valves: Manley stainless steel valves in assemblies (inconel exhaust valves on marine applications)
Valve Diameter: 1.940" intake, 1.600" exhaust (11/32" stem)
Guide Plates: Special World part #830460-8
Rocker Arm Studs: Screw-in style
Rocker Arms: Adjustable rockers recommended. 1.6 ratio (use of 1.73 ratio will require elongation of pushrod holes)
Intake Runner: 180cc, standard port location
Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
Combustion Chamber: 58cc
Spark Plug: 14mm 5/8" .460" reach tapered style
Valve Job: Multi-angle intake and radiused exhaust
Valve Cover Rail: Raised
Valve Angle: Stock 20°
Accessory Bolt Holes: Stock
50-State Emissions legal
Spring Specs
1.250": 100 lbs. @ 1.810", 300 lbs. @ 1.250", coil bind @ 1.200", max lift @ .570"
1.437": 125 lbs. @ 1.810", 340 lbs. @ 1.210", coil bind @ 1.160", max lift @ .600"
1.550": 200 lbs. @ 1.900", 480 lbs. @ 1.200", coil bind @ 1.150", max lift @ .700"
Head Flow @ .600 Lift
236 intake, 169 exhaust (Super Flow 1050)
254 intake, 176 exhaust (Super Flow 600)
All heads flowed with a standard .750" intake plate, without exhaust tube, and 28" of water.
Cam Details E-1018-P:
Range Part Number Direction Cam Int Valve Int Advdur Int Timdur Int Open Int Close Int Overlap Lash Int Center Int Cyl Footnote
C E-1018-P INT .318 .509 300° 222° 5° BTC 37° ABC 79° HYD 107° 8
EXH .332 .532 309° 232° 55° BBC 3° BTC 117°
here are some pictures. again, intake, oilpan/pickup, and valve covers do not come with the engine.
http://s674.photobucket.com/albums/vv107/perrace/forsale/302ford/
$3500
=========================================
Pontiac 400
Forged TRW pistons pn# L2262 040
all new rings/bearings/freeze plugs
tq plate
neoprene rubber rear main seal
block date code: J193 (Oct 19, 1973)
204602
ring dimensions:5/16, 5/64, 3/16
dome shape: flat; 4 reliefs
compression dist.: 1.714
deck clearance.021
press type pin
.0020 skirt clearance
your head cc = compression ratio
69.0 = 10.28
72.0 = 9.98
87.0 = 8.74
96.0 = 8.14
111.0 = 7.33
114.0 = 7.19
pics--- http://s674.photobucket.com/albums/vv107/perrace/pontiac_shortblock/
$1800
=========================================
M-9933-A50 1986-93 Mustang
This gasket is manufactured with a 67mm bore diameter to accommodate the Ford Racing 65mm throttle body and EGR spacer. Fits between the throttle body and spacer.
$5.00 (i have 2 of these)
M-9464-A50 - Ford Racing Intake Manifold Gaskets Details
This gasket is manufactured with a larger 70mm bore diameter to accommodate the Ford Racing 65mm throttle body and EGR spacer. Fits between EGR spacer and intake manifold. If you have ever tried to modify the production gasket to fit a larger spacer, you will truly appreciate these pieces.
$5.00 (i have 3 of these)
Ford DOHC INTAKE GASKET. STOCK FORD PART# xr3z-9e436-ac
$30.00 (i have 2 of these)
=========================================
Vortech Metal Idler Pulley setup for 8-Rib
4FK016-021
Vortech Metal Idler Pulley (2 1/2")
Replacement Idler Pulley used in Vortech Supercharger Kits.
Pulley is used in the following vehicles:
1996-1999 Ford Cobra with 4.6L
1997-2002 Ford Truck with 4.6L
1994-2001 Acura Integra with 1.8L
1999-2000 Honda Civic SI
$40
4FA116-023 Vortech IDLR ASY, 8RIB X 6" ALUM $124.95
=========================================
stock LT1 parts:
lt1 intake with injectors $150
=========================================
TCI Ford Small block flexplate
11.5" bolt pattern 164 tooth.
Code: 529620
This is a brand new flexplate, was bolted to a motor but never started. No wear on the teeth at all.
For Ford applications, TCI® OEM-style small block flexplates are constructed to precise standards and are SFI 29.1 approved. Built extra-thick with welds on both sides of the ring gear, these flexplates are precision-balanced and checked for runout.
11.5" Bolt Pattern, 164-Tooth
new from tci they sell for $91.73
will take $75 for it.
=========================================
Innovators West dampner
Product Information
Mod Motor Ford - 8-Rib Drive - 18% Overdrive
The 18% overdrive dampner generally requires the use of an aftermarket water pump in some applications. Clearance of 4.140" from the center of the crank is needed. A remote mount pump, electric pump or electric pump with small diameter idler (Meziere WP347) is suggested.
The "Mod Motor" dampners are designed to fit 4.6L 2V, 3V and 4V motors as well as 5.4L 2V motors.
Weight - 8.4#
Diameter - 7.75"
===========================================
most all items are OBO, some have a firm price, if your interested, just ask.
If you would like it shipped to you, we ask that you cover the shipping. the 306 and 400 i would like picked up, but arrangements can be made for shipping, again the buyer would need to cover the shipping, just ask and we can work something out.
shop hrs m-f 8:00-5:00 sat by appt. for pickup on items late hours can be arranged.
Items are all in Plainfield, IL 60585 (aprox 60 min sw of Chicago)
23807 w andrew road
plainfield, il 60585
815-254-2333
[email protected]
mitsubishi roller is sold, still have engine and trans. make me an offer on one or both!
i have a rebuilt engine that will be sold separately for $2750
the transmission can go for $1250
make an offer on all this stuff.
http://i674.photobucket.com/albums/vv107/perrace/forsale/mits30e.jpg
http://i674.photobucket.com/albums/vv107/perrace/forsale/mits30.jpg
=========================================
Set of eight (8) Jesel Exhaust rockers for use in Brodix canton valve type head
these were used on an engine on our engine dyno for less then an hour.
stamped number on the bottom is CQGR70
ONLY EXHAUST
$email me
=========================================
=========================================
hitachi Racing Starter SBFord 221-351w PP102
$125
=========================================
=========================================
stock used parts:
1996-1998 Ford Mustang DOHC 4v Cobra 8 bolt flywheel
Used, Nodular 8 bolt flywheel OEM, part # RF-F6ZR-6380-BB
needs to be resurfaced, i can have it done if you want.
$75 as is, $140 surfaced.
=========================================
Ford 306CI longblock: pictures show valve covers, intake and oil pan, DOES NOT INCLUDE VALVE COVERS, INTAKE, OILPAN OR PICKUP)
It does include the timing cover, harmonic balancer, and flexplate.
Rods: stock ford
Pistons: Probe flattop pistons
Bolts: ARP
Heads: World Products Heads (p/n 710032 casting number I-057 W J/R) See tech specs below.
Cam: Elgin Industries (see specs below) (according to World Products they are the same casting as the Iron windsor jr heads they currently list on their site, but they are aluminum)
Head Technical Specs:
Casting ID Number: I-058
Material: High density cast iron
Valve Seats: Intake (integral), exhaust (hardened)
Valve Guides: Integral cast iron
Spring Seats: Machined for 1.560" and 1.250"
Valves: Manley stainless steel valves in assemblies (inconel exhaust valves on marine applications)
Valve Diameter: 1.940" intake, 1.600" exhaust (11/32" stem)
Guide Plates: Special World part #830460-8
Rocker Arm Studs: Screw-in style
Rocker Arms: Adjustable rockers recommended. 1.6 ratio (use of 1.73 ratio will require elongation of pushrod holes)
Intake Runner: 180cc, standard port location
Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
Combustion Chamber: 58cc
Spark Plug: 14mm 5/8" .460" reach tapered style
Valve Job: Multi-angle intake and radiused exhaust
Valve Cover Rail: Raised
Valve Angle: Stock 20°
Accessory Bolt Holes: Stock
50-State Emissions legal
Spring Specs
1.250": 100 lbs. @ 1.810", 300 lbs. @ 1.250", coil bind @ 1.200", max lift @ .570"
1.437": 125 lbs. @ 1.810", 340 lbs. @ 1.210", coil bind @ 1.160", max lift @ .600"
1.550": 200 lbs. @ 1.900", 480 lbs. @ 1.200", coil bind @ 1.150", max lift @ .700"
Head Flow @ .600 Lift
236 intake, 169 exhaust (Super Flow 1050)
254 intake, 176 exhaust (Super Flow 600)
All heads flowed with a standard .750" intake plate, without exhaust tube, and 28" of water.
Cam Details E-1018-P:
Range Part Number Direction Cam Int Valve Int Advdur Int Timdur Int Open Int Close Int Overlap Lash Int Center Int Cyl Footnote
C E-1018-P INT .318 .509 300° 222° 5° BTC 37° ABC 79° HYD 107° 8
EXH .332 .532 309° 232° 55° BBC 3° BTC 117°
here are some pictures. again, intake, oilpan/pickup, and valve covers do not come with the engine.
http://s674.photobucket.com/albums/vv107/perrace/forsale/302ford/
$3500
=========================================
Pontiac 400
Forged TRW pistons pn# L2262 040
all new rings/bearings/freeze plugs
tq plate
neoprene rubber rear main seal
block date code: J193 (Oct 19, 1973)
204602
ring dimensions:5/16, 5/64, 3/16
dome shape: flat; 4 reliefs
compression dist.: 1.714
deck clearance.021
press type pin
.0020 skirt clearance
your head cc = compression ratio
69.0 = 10.28
72.0 = 9.98
87.0 = 8.74
96.0 = 8.14
111.0 = 7.33
114.0 = 7.19
pics--- http://s674.photobucket.com/albums/vv107/perrace/pontiac_shortblock/
$1800
=========================================
M-9933-A50 1986-93 Mustang
This gasket is manufactured with a 67mm bore diameter to accommodate the Ford Racing 65mm throttle body and EGR spacer. Fits between the throttle body and spacer.
$5.00 (i have 2 of these)
M-9464-A50 - Ford Racing Intake Manifold Gaskets Details
This gasket is manufactured with a larger 70mm bore diameter to accommodate the Ford Racing 65mm throttle body and EGR spacer. Fits between EGR spacer and intake manifold. If you have ever tried to modify the production gasket to fit a larger spacer, you will truly appreciate these pieces.
$5.00 (i have 3 of these)
Ford DOHC INTAKE GASKET. STOCK FORD PART# xr3z-9e436-ac
$30.00 (i have 2 of these)
=========================================
Vortech Metal Idler Pulley setup for 8-Rib
4FK016-021
Vortech Metal Idler Pulley (2 1/2")
Replacement Idler Pulley used in Vortech Supercharger Kits.
Pulley is used in the following vehicles:
1996-1999 Ford Cobra with 4.6L
1997-2002 Ford Truck with 4.6L
1994-2001 Acura Integra with 1.8L
1999-2000 Honda Civic SI
$40
4FA116-023 Vortech IDLR ASY, 8RIB X 6" ALUM $124.95
=========================================
stock LT1 parts:
lt1 intake with injectors $150
=========================================
TCI Ford Small block flexplate
11.5" bolt pattern 164 tooth.
Code: 529620
This is a brand new flexplate, was bolted to a motor but never started. No wear on the teeth at all.
For Ford applications, TCI® OEM-style small block flexplates are constructed to precise standards and are SFI 29.1 approved. Built extra-thick with welds on both sides of the ring gear, these flexplates are precision-balanced and checked for runout.
11.5" Bolt Pattern, 164-Tooth
new from tci they sell for $91.73
will take $75 for it.
=========================================
Innovators West dampner
Product Information
Mod Motor Ford - 8-Rib Drive - 18% Overdrive
The 18% overdrive dampner generally requires the use of an aftermarket water pump in some applications. Clearance of 4.140" from the center of the crank is needed. A remote mount pump, electric pump or electric pump with small diameter idler (Meziere WP347) is suggested.
The "Mod Motor" dampners are designed to fit 4.6L 2V, 3V and 4V motors as well as 5.4L 2V motors.
Weight - 8.4#
Diameter - 7.75"
===========================================
most all items are OBO, some have a firm price, if your interested, just ask.
If you would like it shipped to you, we ask that you cover the shipping. the 306 and 400 i would like picked up, but arrangements can be made for shipping, again the buyer would need to cover the shipping, just ask and we can work something out.
shop hrs m-f 8:00-5:00 sat by appt. for pickup on items late hours can be arranged.
Items are all in Plainfield, IL 60585 (aprox 60 min sw of Chicago)
23807 w andrew road
plainfield, il 60585
815-254-2333
[email protected]
Last edited:
