Intercooled XPZ demod- ( low mile L32 , Gen V IC, Electric water pump)

One of my friends is getting out of the 3800 game. He is not on the forums a lot so I am posting this for him. I will be relaying any questions, offers, etc... to him.




Gen V IC package- $800 ( newest style stage 2 gen V core, gm pump, FMHE, zzp modded rails, bolts )
Meziere Electric Water Pump- SOLD



Xpz cam package- $375
Double roller- $100
Machined oil pump cover- $35
Oe-r lifters- $100
Mls head gaskets- $100
Head studs arp- $40
8 rib setup w/ pulleys and crank- $150
L32 - $750
Heads- $1200 ( add $75 for head gaskets and head studs)



complete assembled long block with everything listed above for $2500

His preference is to sell the block complete. But if there is enough interest in the parts individually, he will be willing to sell them separately.

07 l32 had 10k on it when i bought it, after the build i put around 9k on the setup. this has the balance shaft removed and a oil passage tapped and plug installed. The double roller gears have been chamfered and cam gear machined to solve chain breaking issuse that is well known with double roller setups. Heads were bought from a member on here specs...(ELECTRIC WP NOT INCLUDED PRICE IS NOW FOR BLOCK, CAM, HEADS, COMPLETE ALL YOU NEED IS W/P, EXHAUST MANIFOLD, INTAKE AND SUPERCHARGER TO HAVE A RUNNING ENGINE)

Flow numbers.
[.100 lift] --- [57.9 intake] [52.3 exhaust]
[.200 lift] --- [110.8 intake] [109.7 exhaust]
[.300 lift] --- [151.7 intake] [144.9 exhaust]
[.400 lift] --- [179.1 intake] [178.1 exhaust]
[.500 lift] --- [191.0 intake] [187.3 exhaust]
[.600 lift] --- [197.1 intake] [189.0 exhaust]

Hardware
manley severe duty valves installed, 1.9 intake and 1.55 exhaust.
Manley 150# nextek beehive spring's
Manley titanium retainers
PBM chromemoly machined valve lock's
New bronze valve guides
recut competition valve job for new valves
High clearance valve seals


the prices are what new they would cost minus shipping cost to show savings to you

Xpz cam $479
Double roller $209
Machined oil pump cover $55
Oe-r lifters $167
Mls head gaskets $184
L32 arp connecting rod bolts $160
Main studs arp $50
Head studs arp $80
Clevite Rod bearings $40
Clevite main bearings $50
8 rib pulley set $85
8 rib crank $129
L32 w/10k $1000
Heads $2500




100_1550.jpg

100_1593.jpg

100_1594.jpg

100_1595.jpg

100_5768.jpg

100_1596.jpg

100_1585.jpg

100_1586.jpg

exhaust.jpg

intake.jpg
 
Last edited:

1998gpgt

TCG Elite Member
Apr 25, 2008
1,099
329
Boulder, CO
nooooooooooooooooooooooooooooooooooooooooooo







ask if he will trade my mini dirt bike for the waterpump and a dollar or three

I will propose the idea... but I think he is primarily looking for cash


Meziere Electric Water Pump- $250

Where was it purchased? Is it the HD version?

This was purchased from RED_GTX . I will find out if it is the HD version.
 

10sec

I haz dat teddy bear smile.
TCG Premium
Jul 26, 2008
25,942
5,812
This is toastedmcutlass right? Sucks he's getting out of this :sad: I've met him before, he sold me my 077's. Cool guy, last time i saw him he had just yanked out his old motor with the xp cam and the hole in his block :rofl:
 

1998gpgt

TCG Elite Member
Apr 25, 2008
1,099
329
Boulder, CO
This is toastedmcutlass right? Sucks he's getting out of this :sad: I've met him before, he sold me my 077's. Cool guy, last time i saw him he had just yanked out his old motor with the xp cam and the hole in his block :rofl:

yep. toastemcutlass. He experienced an unfortunate trans failure and is cutting his losses rather than rebuilding it. sad to see it go.

Say whaaaat?? He was in love with that cutlass

the cutlass has been murdered

Might be down for the intercooler package.. Gotta check funds n such.


Just let me know. There are a few other guys interested at the moment... but local is better :bigthumb:
 

Turbocharged400sbc

3800 & 4T80E > ALL
TCG Premium
Jun 16, 2007
32,540
15,847
hangover park IL
yep. toastemcutlass. He experienced an unfortunate trans failure and is cutting his losses rather than rebuilding it. sad to see it go.



the cutlass has been murdered




Just let me know. There are a few other guys interested at the moment... but local is better :bigthumb:

awe shit scotts giving up on the gutlass? murdered?!?!!!!!!
:fu:
wtf imma gonna call that bastard lol

i setup the tchain so if anyones interested in the motor it's all good
 

1998gpgt

TCG Elite Member
Apr 25, 2008
1,099
329
Boulder, CO
awe shit scotts giving up on the gutlass? murdered?!?!!!!!!
:fu:
wtf imma gonna call that bastard lol

i setup the tchain so if anyones interested in the motor it's all good


The cutlass was sent to the crusher :hs:


Well that sucks. I sold my injectors to Scott. What's his next project?

he decided to go with a reliable car that won't break and/or leave him carless at inconvenient times. said car has not yet been purchased. and don't worry... the injectors will live on in my car.


ANY possibility of parting with the modded rails?

most likely not. there has already been plenty of interest in the intercooler kit as a whole.
 

Wessel

The Paint Corrector
Oct 25, 2007
2,305
2
nothing against jim (1998gpgt) hes a great guy. but the guy that is actually selling the shit sets up a deal with me then sends me a text saying his neighbor offered him more. i turned down a side job tonight to pick the shit up. all i can say is wow! what happened to people keeping their word. yes i understand it was best offer. its just the point. so be careful buying anything from him. u may think ur getting something then he sells it to someone else.
 

Thread Info