going through some money problems so i gotta sell some of my stuff..shoot me a offer..i would like $260..
competition cams X-P HOT cam is designed for supercharged or nitrous applications on 96 and up GM 3800s. The XP cam produces higher WHP and torque numbers than any cam grind currently available (that can be used with stock heads).
With supporting mods and a 3.0" pulley this cam is capable of 300WHP non-intercooled, and 340WHP intercooled. A PCM with raised shift points (6400) and rev limiter (6800) is recommended.
*
212°/224° at .050"
*
Intake Lift .325" (.520" lift at 1.6:1 rocker ratio)
*
Exhaust Lift .335" (.536" lift at 1.6:1 rocker ratio)
*
116 Lobe Separation
competition cams X-P HOT cam is designed for supercharged or nitrous applications on 96 and up GM 3800s. The XP cam produces higher WHP and torque numbers than any cam grind currently available (that can be used with stock heads).
With supporting mods and a 3.0" pulley this cam is capable of 300WHP non-intercooled, and 340WHP intercooled. A PCM with raised shift points (6400) and rev limiter (6800) is recommended.
*
212°/224° at .050"
*
Intake Lift .325" (.520" lift at 1.6:1 rocker ratio)
*
Exhaust Lift .335" (.536" lift at 1.6:1 rocker ratio)
*
116 Lobe Separation
Last edited: