1998 Grand Prix GTP - 123k miles - $1,500 - Gurnee area
Unfortunately - I have not spent time working on this - as I have too many cars and things... If someone has fiberglass experience- this would be a fun project.
1998 GTP - has AED Bodykit - and low mileage trans, good AC, good heat, fun
123,000 miles
I will update later tonight/tomorrow with additional info/parts
was $2,500 - NOW $1,500
Bad
Hit a deer a few years ago. There is a dent on front passenger side quarter panel. There is some damage on front body-kit from hitting frame.
WOT - there is some knock/hesitation. Could use tuneup and look into.
Trunk lid is starting to peal - ~1/4 topcoat off
rusting on passenger side door - there window meets the door
Upgrades -
I will add more later. My wife wants me to help her with some things.
Joe A
847-371-1496
Unfortunately - I have not spent time working on this - as I have too many cars and things... If someone has fiberglass experience- this would be a fun project.
1998 GTP - has AED Bodykit - and low mileage trans, good AC, good heat, fun
123,000 miles
I will update later tonight/tomorrow with additional info/parts
was $2,500 - NOW $1,500
Bad
Hit a deer a few years ago. There is a dent on front passenger side quarter panel. There is some damage on front body-kit from hitting frame.
WOT - there is some knock/hesitation. Could use tuneup and look into.
Trunk lid is starting to peal - ~1/4 topcoat off
rusting on passenger side door - there window meets the door
Upgrades -
- AED bodykit - this is original prototype (Grand Prix Body Package Complete 97+ [GPCOM97+] - $1,850.00 : AEDCentral Parts Department!, Part of the AEDCentral Network!) I also have a wing for it - but not the risers.
- Trans - trans replaced by LP3800's dad - in 2004 - only ~50k miles since. I have the paperwork somewhere with gear info.
- Supercharger with removable ZZP pullies. 3.4, 3.25 (installed), 2.9. They have botls to change pulleys. I am pretty sure I have belts to go with each
- PCM - updated by beyrech
- Koni's - all around, and strut tower braces
- 12" front brakes (does not fit crosslace rims). I have crosslace rims on rear since they have so much tread life left.
- GTP
- It used to have BTK Intercooler - so has an EGR valve bypass - and delete (no emissions issues)
- TOGs headers
- Exhaust - to two corvette tips (installed by James Dean or other Chi shop)
- Whizaird CAI - could use a cleaning
- bunch of random things - taillights, GTP Trunk lid, rear wing
I will add more later. My wife wants me to help her with some things.
Joe A
847-371-1496
Attachments
Last edited: