1991 AWD Civic Wagovan project for sale

Helping my brother n law sell his civic that he has had for quite a few years and he wants to part with. It ran and drove until the timing belt broke and thats when it has turned unto what he has today. It is a "rolling chassis" but comes with both the original engine, a forged engine that he planned on running, the original auto trans and a manual transmission that was supposed to take its place. The car will come with the original wheels and tires along with the wheels pictured that are brand new and have never been driven on. The car has tipical bumps and what not of a 25 year old honda but other than the rear 1/4's its quite rust free. I live with him so any questions or picture requests I can get done asap.

Here is a list that he wrote for me, I am pretty dumb with imports so hopefully a lot of this makes sense for you guys. He is looking for $3500 but is flexible on the price. You will be getting the car, 2 engines, 2 transmissions, 2 sets of wheels and tires and a crapload of extra parts.

Included with the car are the original wheels and a set of BRAND NEW 0 Mile F1R 15" wheels with 195/50/R16 Tires.

The original D16 A6 engine and all components will come with it but also the Forged D16 Z6 that I had intended to run with a turbo. The specs on this engine include

D16Z6 Block Bored out
Oil Pan tapped for turbo drain
Eagle Rods
Vitara Pistons 75.5mm
Arp Head Studs
Stock Vtec SOHC Head
Cometic Head Gasket
New Valve cover set
New Valve cover bolt/washer kit
Powdercoated Valve Cover with Bungs welded in

Also included are:
New AEM Billet Fuel Rail (Black)
New MSD Blaster Coil and bracket kit
New 10.2mm VMS Spark Plug Wires
New VMS Performance Distributor Cap and Rotor kit
New NGK G-Power Platnum Spark Plugs
New 4 Bar Map Sensor
New Intake Air Sensor
New Green Vtec Oil Pressure Switch Solonoid
New Water Temp Sensor
Refirbished Vtec Solenoid with new gasket
New Knock Sensor
New AEM Timing Gear
New TPS Sensor
New Competetion Clutch- Stage 4 - 6 Puck Ceramic Clutch kit
New Competetion Clutch Light weight Flywheel
New ARP Clutch bolts
New ARP Flywheel Bolts
New Edelbrock Performer intake manifold
New Blackworks Racing Throttle body
Used RC Auto Ram Horn Turbo Manifold
Turbo cold side piping with BOV flange
New Alternator
New Starter
B&M Short Throw shifter
Ac delete kit with firewall Plug
New Innovative Motor mounts for Manual Trans
Used D16 L3 Cable Manual Transmission
Used stock Vtec SOHC head
Chipped ECU
Multiple Engine harness sets
Plus a bunch more

IMG_1182_zpsxpkuf3n4.jpg


IMG_1183_zpsze2mbwrb.jpg


IMG_1185_zpsjnbm0w0t.jpg



IMG_1200_zps8dx9m3tq.jpg



IMG_1206_zpstufr5l63.jpg



IMG_1213_zpsjaw5mujy.jpg



IMG_1233_zps3rwl4oyi.jpg



IMG_1218_zpsvvgwz0yt.jpg


IMG_1217_zpsedbbfagr.jpg


IMG_1234_zpsmjswqpkf.jpg


IMG_1219_zpsfxduubuu.jpg



IMG_1237_zpsr44ov0ia.jpg



IMG_1226_zpskc0hfyqz.jpg



IMG_1222_zpsjfee5juc.jpg



IMG_1224_zpsdkryng9v.jpg


IMG_1223_zpsfgz4adpg.jpg


IMG_1220_zpsg2ncfrzu.jpg



IMG_1195_zpsuzwnntd9.jpg


IMG_1192_zpsfgbrd3oi.jpg



IMG_1191_zps3usunnwe.jpg


IMG_1190_zpsgppmnv0e.jpg


IMG_1189_zpsmisopzh5.jpg


IMG_1230_zpst686cecn.jpg



IMG_1193_zpsdx2xkq8l.jpg



IMG_1197_zpsq3pv3o9z.jpg


IMG_1198_zpsxi7waskg.jpg


IMG_1204_zpsgkldkmy9.jpg
 

Boostie

TCG Elite Member
TCG Sponsor
Jul 15, 2010
2,852
4,140
I really want to see him finish this thing and hurt some feelings but he really wants to get back into an f-body again. His end goal was to have it at 450 awhp and daily drivable. Thing is ugly as sin but for some reason I think its awesome and would leave the body exactly as it sits.
 

Dasfinc

Ready for the EVlution
Sep 28, 2007
20,919
1,321
Wheaton, IL
Price?

I'll be honest, Quarter panel rust makes the shell not very valuable despite being a more 'rare' vehicle in itself, he might make more money parting everything else out and selling the roller separate. Not-complete projects like this take a BIG value hit :(.

Mind you, I'd LOVE to see this on the road, LOVE me some Wagovan.
 

wombat

TCG Elite Member
TCG Premium
Sep 29, 2007
14,112
3,003
WI
Price?

I'll be honest, Quarter panel rust makes the shell not very valuable despite being a more 'rare' vehicle in itself, he might make more money parting everything else out and selling the roller separate. Not-complete projects like this take a BIG value hit :(.

Mind you, I'd LOVE to see this on the road, LOVE me some Wagovan.

Reading > You Mr. Finc.

Price is listed at $3,500, negotiable.
 

Turbocharged400sbc

3800 & 4T80E > ALL
TCG Premium
Jun 16, 2007
32,640
16,099
hangover park IL
Price?

I'll be honest, Quarter panel rust makes the shell not very valuable despite being a more 'rare' vehicle in itself, he might make more money parting everything else out and selling the roller separate. Not-complete projects like this take a BIG value hit :(.

Mind you, I'd LOVE to see this on the road, LOVE me some Wagovan.

I wanna be there when yer old lady see's ya brought home yet another "minty" honda
 

Thread Info