Contact: via pm -Chris. If you have any questions or want more pics of something don't hesitate to ask.
Location: Plainfield/Joliet 10 min from the Joliet/Aurora exit on I55 OR 119th & rt59
- Probe flat top pistons (12396-std) Pistons don't have many miles and have minimal wear. Just need some new rings. Pistons are still mounted to the rods, can be removed if you don't want them. SOLD
- 4v C head valve covers w/ cop covers (can be washed before sale) $100
- 4v lower intake manifold $200
- 4.6 dohc front cover $75
- 4.6 Rear cover $50
- 4v Primary, secondary, crank gear(s), cam spacers, cam bolt washers $obo
- 4v knock sensor harness $25
- 4.6 Balancer $30obo
- 4.6 6bolt flexplate. (Can be media blasted before sale) $50obo
-New 4.56 gear for 8.8 rear end. SOLD
- NEW in package ford axle seals and bearings $20
http://www.jegs.com/i/Ford-Racing/397/M-1225-B/10002/-1?parentProductId=2882653
- Stock 8.8 cover $beer
- arp rod cap bolts. (16qty) Came off of manley H beam rods ~1000 miles $50obo
- Oil pick up tube $15
- Stock upper control arms $beer
- 28 spline trac-lok diff. Worked fine, wouldn't hurt to get it rebuilt SOLD
- stock cross member for tr3650 $30
- stock Drive shaft for tr-3650 $50
- 03 Mach1 stock clutch/pressure plate, did not slip at all, 40xxx miles $beer
- 4.6 oil pan from a 2005 lincoln aviator $30
Location: Plainfield/Joliet 10 min from the Joliet/Aurora exit on I55 OR 119th & rt59
- Probe flat top pistons (12396-std) Pistons don't have many miles and have minimal wear. Just need some new rings. Pistons are still mounted to the rods, can be removed if you don't want them. SOLD
- 4v C head valve covers w/ cop covers (can be washed before sale) $100
- 4v lower intake manifold $200
- 4.6 dohc front cover $75
- 4.6 Rear cover $50
- 4v Primary, secondary, crank gear(s), cam spacers, cam bolt washers $obo
- 4v knock sensor harness $25
- 4.6 Balancer $30obo
- 4.6 6bolt flexplate. (Can be media blasted before sale) $50obo
-New 4.56 gear for 8.8 rear end. SOLD
- NEW in package ford axle seals and bearings $20
http://www.jegs.com/i/Ford-Racing/397/M-1225-B/10002/-1?parentProductId=2882653
- Stock 8.8 cover $beer
- arp rod cap bolts. (16qty) Came off of manley H beam rods ~1000 miles $50obo
- Oil pick up tube $15
- Stock upper control arms $beer
- 28 spline trac-lok diff. Worked fine, wouldn't hurt to get it rebuilt SOLD
- stock cross member for tr3650 $30
- stock Drive shaft for tr-3650 $50
- 03 Mach1 stock clutch/pressure plate, did not slip at all, 40xxx miles $beer
- 4.6 oil pan from a 2005 lincoln aviator $30
Last edited: