fbody turbo kit...F*ing MEAN!!!!!

ls1 fbody turbo kit, one off built for grudge racing and some looks....pretty duh self explanatory...all stainless and aluminum, 90% semi polished, and fully tigged by a local shop. was built to max out a forged 347 & precision 7675. all tigged & very complete! fits like a glove, keeps everything in stock locations including sway bar and abs...."ABS if your a sally". but no A/C. this was built for racing. fits stock radiator w pusher fan set up. fits stock k member flawless spark plug access....PICS DO NOT DO JUSTICE!!!!! HAVE TO SEE IN PERSON!!!

-custom headers
-crossover w/2 o2bungs flanged for 44mm gate
-3in down pipe w/o2 bung for wide band
-t4 flange
-aluminum IC piping
-31x12x4 intercooler
-charge pipe w/ 50mm bov flange
-all couplers
-all clamps
-all NEW un used!
-other misc parts

3100.00 for kit

5300.00 for full kit AND precision PT7675 turbo, precision 46mm wastegate, tial 50mmQ blowoff valve, oil feed and drain...and a few odd and ends! pm for full details..................again these pics do not do justice!

Click to read more...

 

[Ttranssam]

here ya can see the some quality shots....and i know that is not a precision in the pics!!! but turbo gate bov are all brand new in box! un used and carry full warrantys!!!

 

[willizm]

Top notch stuff man. I can vouch for this guy, he makes really good kits.

 

[Ttranssam]

dude....your friggen everywhere! lol. whats going on for thurs??? beerz? i owe you a few lol

 

[willizm]

dude....your friggen everywhere! lol. whats going on for thurs??? beerz? i owe you a few lol

Won't be able to do it. I land late on Thursday and fly back out Sunday. After that I got two weeks working from home but things have been crazy otherwise.

 

[Ttranssam]

trans????

 

[willizm]

Not yet, supposedly will ship this week. They had a bad batch of shafts from manufacturing so it set everything back. At least that is what Jakes keeps telling me anyway.

 

[Ttranssam]

lol....ill shoot ya a text tomorrow...i have a big upgrade for your car when your ready and ill give ya a hint....75mm

 

[Ttranssam]

bump!!!

 

[Blown 346]

Curious as to what kind of power this setup will produce on average boost/stock cube setup. Looks killer.

 

[willizm]

It depends on how much boost you'd like to push, trans, cubes, fuel, supporting mods and turbo. These singles on a stock 346 ls1 at 8-10psi with say a pt7675 can make anywhere from 550-650whp on straight 93 pump gas. It just really depends for example a manual car would show quite a bit more power than a stalled auto on a dyno. Dyno's very wildly also. On these conservative boost levels(8-10psi) for say a stock bottom end ls1/ls6 you should be about 550whp conservatively. The thing I like about turbo kits like this is scalability. You can forge your block, turn the wick up and throw some e85 and get even more power out of it.

 

[6literEat'r]

nice lookin kit man!

 

[rz79]

Those welds make my caulk hard! GLWS

 

[Ttranssam]

It depends on how much boost you'd like to push, trans, cubes, fuel, supporting mods and turbo. These singles on a stock 346 ls1 at 8-10psi with say a pt7675 can make anywhere from 550-650whp on straight 93 pump gas. It just really depends for example a manual car would show quite a bit more power than a stalled auto on a dyno. Dyno's very wildly also. On these conservative boost levels(8-10psi) for say a stock bottom end ls1/ls6 you should be about 550whp conservatively. The thing I like about turbo kits like this is scalability. You can forge your block, turn the wick up and throw some e85 and get even more power out of it.

thanks bud for filling in for me...but yeah the kit with a precision would be able to push a FORGED ls1 pretty goddamn far. if seen people hit almost 900rwhp with supporting mods.

 

[Ttranssam]

Those welds make my caulk hard! GLWS

lol thanks man...

 

[Ttranssam]

5 free lap dances at choice strip club and beerz for the night with purchase!!!!!!

 

[Runtz52]

dem welds, looks like a great kit, glws