D.S.S. XR 313ci
R302 O-Ringed Block
.072 over
D.S.S. XR Gas Ported Pistons/Coating on top of Piston-New**
Total Seal Gapless Rings-New**
D.S.S. 4340 5.400 H-beam Rods/Arp 2000 Rod bolts-8 passes
D.S.S. 4340 Forged Crank 3.00 stroke 28oz
Clark Copper Head Gaskets .062 thickness-New**
ARP Main Studs
Canton 7qt Oil Pan
Melling high vollume oil pump
Pan is tapped on Driverside for blower oil
Coast High Performance Belt Drive
ATI 28oz Super Dampner balancer
Reichard Crank trigger w/ MSD wheel
FOX LAKE TW NMRA Renegade Heads
2.05 titanium Intake Valves
1.60 Stainless steel exhaust valves
titanium retainers
Specs on Valve springs can be getting from Fox Lake for serious buyer
Heads have 8 passes since Valve job and new valves seats-Have all paper work from FoxLake
Harland Sharp Shaft Mount Rockers 1.6
Comp Cams Custom NMRA Renegade Legal cam-.550 lift/Bob does not disclose cam specs
Comp Cams Moly pushrods
Total Engine Airflow/Brian Tooley Ported Holley Systemax Intake
More info to serious buyer
ARP intake bolts
FEL-1262R Gasket
Holley 75mm throttle body w/egr delete spacer
This is Bob's Complete Motor that went 8.56@157
The motor went 8.88@153 in my car with a bad converter 3220lbs w/driver
Motor is unfired and fresh with no oil or water put in motor yet
The Motor was Assembled by 2008 NMRA Renegade Champion Bob Cook
Would like to sell as long block
the only parts that were not Bob Kurgans was the belt drive and oil pan
Serious buyers only..no tire kickers
$8,500 Firm
R302 O-Ringed Block
.072 over
D.S.S. XR Gas Ported Pistons/Coating on top of Piston-New**
Total Seal Gapless Rings-New**
D.S.S. 4340 5.400 H-beam Rods/Arp 2000 Rod bolts-8 passes
D.S.S. 4340 Forged Crank 3.00 stroke 28oz
Clark Copper Head Gaskets .062 thickness-New**
ARP Main Studs
Canton 7qt Oil Pan
Melling high vollume oil pump
Pan is tapped on Driverside for blower oil
Coast High Performance Belt Drive
ATI 28oz Super Dampner balancer
Reichard Crank trigger w/ MSD wheel
FOX LAKE TW NMRA Renegade Heads
2.05 titanium Intake Valves
1.60 Stainless steel exhaust valves
titanium retainers
Specs on Valve springs can be getting from Fox Lake for serious buyer
Heads have 8 passes since Valve job and new valves seats-Have all paper work from FoxLake
Harland Sharp Shaft Mount Rockers 1.6
Comp Cams Custom NMRA Renegade Legal cam-.550 lift/Bob does not disclose cam specs
Comp Cams Moly pushrods
Total Engine Airflow/Brian Tooley Ported Holley Systemax Intake
More info to serious buyer
ARP intake bolts
FEL-1262R Gasket
Holley 75mm throttle body w/egr delete spacer
This is Bob's Complete Motor that went 8.56@157
The motor went 8.88@153 in my car with a bad converter 3220lbs w/driver
Motor is unfired and fresh with no oil or water put in motor yet
The Motor was Assembled by 2008 NMRA Renegade Champion Bob Cook
Would like to sell as long block
the only parts that were not Bob Kurgans was the belt drive and oil pan
Serious buyers only..no tire kickers
$8,500 Firm
