Well, the time has come for me to sell my car. I need to get out of debt, and this is the best thing to start with. As most of you know, I have done a complete 03 drivetrain swap. I am going to sell it as it sits, there will be no parting it out. Car dynoed at 662rwhp with the 6 speed. The only thing that it needs is to have the converter sent out to be tightened up a bit, it is pretty loose. I also have a 3:55 gear to install, I think the 4:10 is too much.
I will try to get some more pics of the car today
I am looking to get $22,000 obo
White 2001 Cobra
Mods:
Full 03 motor swap
Kenne Bell 2.8h
Built 4R70W with trans brake and lock-up converter
built SRA w/4:10's, 31 spline axles, weight jacker lower control arms and adjustable uppers
biletflow 4 piece idlers w/snub bracket
60lb injectors
mafia
reichard racing manual tensioner
powdercoated valve covers, blower, coil covers, canton intercooler reservior, canton power steering reservior, canton expansion tank, pulley bridge, coolant crossover pipe
Corbeau CR1 seats (black and gray)
rear seat delete
Behind Bars aluminum gas tank
Complete return fuel system, triple walbro 255's, sullivan fuel rails
H.O. fibertrends 2 1/2" cowl
03 side scoops
saleen wing
bbk long tube headers
catted h-pipe
3" mac pro dumps
Gt front brakes to clear the 15's
Billet Specialties street lites (15x4 fronts and 15x10 rears) only about 200 miles on them
lc-1 wideband permently wired in with digital guage
fuel pressure guage
boost guage
x-cal 2
LFP heat exchanger
tokico struts w/coilovers
Tubular k-member and a-arms
probably forgetting some stuff.....
I will try to get some more pics of the car today
I am looking to get $22,000 obo
White 2001 Cobra
Mods:
Full 03 motor swap
Kenne Bell 2.8h
Built 4R70W with trans brake and lock-up converter
built SRA w/4:10's, 31 spline axles, weight jacker lower control arms and adjustable uppers
biletflow 4 piece idlers w/snub bracket
60lb injectors
mafia
reichard racing manual tensioner
powdercoated valve covers, blower, coil covers, canton intercooler reservior, canton power steering reservior, canton expansion tank, pulley bridge, coolant crossover pipe
Corbeau CR1 seats (black and gray)
rear seat delete
Behind Bars aluminum gas tank
Complete return fuel system, triple walbro 255's, sullivan fuel rails
H.O. fibertrends 2 1/2" cowl
03 side scoops
saleen wing
bbk long tube headers
catted h-pipe
3" mac pro dumps
Gt front brakes to clear the 15's
Billet Specialties street lites (15x4 fronts and 15x10 rears) only about 200 miles on them
lc-1 wideband permently wired in with digital guage
fuel pressure guage
boost guage
x-cal 2
LFP heat exchanger
tokico struts w/coilovers
Tubular k-member and a-arms
probably forgetting some stuff.....
