my 89 and 90 foxbody

jim jerk

Member
Aug 8, 2011
66
0
will start with my 90 vert i bought the car done but an currently tryin to clean it up cause the guy did some short cuts on the wiring but it a stock style suspension in the rear and coil overs in the front have a strange rear end with a spool and a 373 gear and strange 10 way shocks.
motor is a stock 302 block with gt40 heads and mac lt's with 40 series dumps on it holley 600 cfm carb and under drive pullies on it manual flaming river rack and steering shaft not sure what size cam yet but will find out over the winter has 1.7 crane roller rockers as well
int has a 6 point and just got the front int in the car minus the rear plastics and seats


dsc01249b.jpg

By jimjerk at 2011-08-08


dsc01250c.jpg

By jimjerk at 2011-08-08


dsc01251pd.jpg

By jimjerk at 2011-08-08


dsc01252y.jpg

By jimjerk at 2011-08-08


dsc01257a.jpg

By jimjerk at 2011-08-08


dsc01254z.jpg

By jimjerk at 2011-08-08
 

jim jerk

Member
Aug 8, 2011
66
0
and my 89 is your basic street car build as well its a stock 302 block with 153k on it stock e7 heads with 1.7 roller rockers 24 lb inj 80m mass air 70 mm throttle body and trickflow intake stock style susp in the rear all strange rear end with a 4.10 and detroit locker and strange 10 ways in the rear


dsc01450e.jpg

By jimjerk at 2011-05-22


dsc01447m.jpg

By jimjerk at 2011-05-22


photo0120x.jpg

By jimjerk at 2011-08-08


dsc03417ej.jpg

By jimjerk at 2011-05-22


dsc03415x.jpg

By jimjerk at 2011-05-22


dsc01449dm.jpg

By jimjerk at 2011-05-22
 

Thread Info