Grrtrude

[esteinmaier]

I thought I made one of these. But it's getting closer, so I figured I would update.

The build:

NGC 2.0L block
96-99 DOHC Neon head
Crane "18" cams
9.2:1 compression, forged bottom end

Manifolds are both made specifically for the build
Exhaust is a long runner, T3, 45mm BEP wastegate
Intake is a short runner 5" plenum, 80mm TB mounted directly to it.
2.5" hot side boost piping
3.5" cold side boost piping
Massive intercooler. (Don't remember the measurements, but it's a 4" core)
BEP s362

Weldon 2005a pump
ID2000 injectors
Surge tank
e85

MS2 with lots of extra toys for management

Weight reduction stage gazillion. Cost me lots of rep points.
8 point cage
CF hood, trunk.
BC coils

I'm probably forgetting a lot. Just a quick run-down.

Click to read more...

 

[TonzKnock-G]

Nice, what kinda car?

 

[Bob Kazamakis]

Pretty sure it's a neon. Non srt-4

 

[esteinmaier]

Oh, yea. Sorry.

 

[CrunkMaro]

nice.

numberS?

 

[HILROD]

N. E. O. N.:csi:

 

[esteinmaier]

nice.

numberS?

I'm hoping for a little over 700.

 

[esteinmaier]

Well, I finally got it running. Still gotta wire in the tach output, launch control, and all the lights. But I also have an injector channel in the standalone that's acting goofy. I'm going to send it back to the guys that have built like 50 of them for my customers and have them rip out all the peak & hold hardware since the new injectors are hi-z.

Next step, head off to the dyno. We just got the dyno at Hilrod's shop working, and if I'm going to tune over there, what better way then to start with one that could easily end up in a mushroom cloud.

Wiring panel, not yet completely done:

Still gotta loom some stuff up:

Kinda what it looks like:

 

[Euro]

That last picture looks wicked. Very nice build

 

[Yaj Yak]

 

[esteinmaier]

I played a little today.

http://youtu.be/bRJS_5cP3GE

 

[Sprayin]

Wiring panel, not yet completely done:

I like how this is set up. I'm in need of putting something like this together. Where'd you get those distribution blocks/fuse panels from?

 

[esteinmaier]

I think you can get them at Autozone. That might be where I grabbed them actually.

 

[Sprayin]

I think you can get them at Autozone. That might be where I grabbed them actually.

Couldnt find them at autozone, but I did at Napa:

http://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=BK_7825316_0282400317

THANKS!

 

[bikrboy128]

that looks so badass. it sounds like a really pissed off chainsaw

 

[HILROD]

It is a pissed off chainsaw! You didn't say it moved!

 

[Malakaone]

Wow. There is a ton going on there. Very cool.

 

[willizm]

Uhhhhh, this is a really badass build. Took me by surprise and man do I want to see how this thing rolls out

 

[willizm]

It is a pissed off chainsaw! You didn't say it moved!

Thats a brilliant name for this car. Sounds the part.

 

[esteinmaier]

So I did some shake down runs yesterday. ErickGLD - YouTube

 

[OffshoreDrilling]

times on that run? about 11s?

 

[esteinmaier]

Nah, no launch. 2.4 60', 12.9 @ 124

 

[Jokerzl]

Mph is moving get that thing to hook Hana

 

[esteinmaier]

Was just trying to get it down the track frankly. It's last pass down the track was like 4 years ago. So now I'll take some stuff apart, make sure everything is solid for more boost, then I'll crank up the boost to 40psi and launch it with boost.

 

[SRT41320]

likes this