🔧 BUILD Jeff's 2005 Jew Canoe - 2005 2wd 5.3 EscaLAAAADE

General Information

[chapter]The Canoe Arrives[/chapter]
Sure it's got 170k on it.
But it came from Florida, and it's a 5.3 2wd
Clean clean clean! Mmm

Plans? Remember all those parts I had for blue balls? Welllllll they'll end up in this here Essssalade.


IMG_20190227_140510.jpegIMG_20190227_140518.jpegIMG_20190227_140527.jpegIMG_20190227_140536.jpeg

[chapter]Elite Sound System Installed[/chapter]


[chapter]Kind of lowered[/chapter]


[chapter]So I made an exhaust[/chapter]




[chapter]Lowered a bit more[/chapter]


[chapter]New Rims[/chapter]

Bob Kazamakis

I’m the f-ing lizard king
TCG Premium
Oct 24, 2007
85,185
44,800
Denver
Real Name
JK
https://tbssowners.com/store/index.php?act=viewProd&productId=183




My caprice thread has a picture of my hoe right now. 2” drop spindles and beltech 5305 springs at 3” with 265/70/17 tires. Was pretty level at 4” but looked saggy to me without take so went back to 3”. Also have helper bags I run 5psi in. Also have the bump stop bracket cut off
 

Bob Kazamakis

I’m the f-ing lizard king
TCG Premium
Oct 24, 2007
85,185
44,800
Denver
Real Name
JK
SIX HUNDRED AND FOURTY-FIVE DOLLHAIRS FOR JUST THE REAR KIT?

no thanks.
Gets you more than just springs.


I bought my belltechs with relocation brackets for like $200 on eBay. Read bad things about any other spindle besides bell tech so ponied up like $150 for those. Could just run springs at 4 and then turn those adjusters down more with spindles


I need to fix my sway bar end links still and I’d like to get an adjustable panhard.
 

Thread Info