Been lurking around here for some time, was a member of chicagosvt as well as the old 3800 board (ilgpc?), figured it was time to make a thread for my Bullitt.
I picked up this 01 Bullitt from a member of IMBOC down in Pensacola, FL back in 2008. I'm technically the 4th owner as the original owner sold it at 100 miles to Sherman, the husband of the lady, Kelly, who I purchased the car from. The car had 12,731 miles on it when I picked it up but after the long haul home, tack on another 1,000 miles of fun. The couple that I bought the car from had everything I could want with the car, every stock piece plus a car cover, window sticker, original warranty/extended warranty info, as well as two magazines that featured articles on the Bullitt.
The car used to have a turbo on the stock motor which eventually popped one fine day at GLD, that resulted in the following build..
2001 Ford Mustang Bullitt #5317
--------
Power Adder
JLT "High Boost" Cold Air intake w/12" Filter Upgrade (03/04 Cobra model)
SCT BA3000 MAF
SCT xCal3 tuned by Drew @ D-Mark Performance
Tork Tech Polished TVS1900 w/"Big Dog" Inlet - Painted Wrinkle Black since the polish looked crappy.
Chisled Performance 6 Gallon Trunk Mounted Ice Tank
Engine
Teksid Block Setup Approx. 9.54:1
-Kellogg Forged Crank
-ModMax Forged I-beam Rods
-Manely 18cc Forged Pistons
-ARP Hardware Throughout
2v Heads ported by Paul Knippen
-Stainless Valves .5mm Oversized
-Tapered Nose Bronze Valve Guides
-Manley Nextec 125lb Seat Pressure Valvesprings
Tim Barth Custom KB Cams
Meziere Electric Water Pump
FRPP 4v Oil Pump and Pickup Tube
Fuel System
83lb Siemens Deka Fuel Injectors
Glenns Performance Triple Walbro Return Style Fuel Systems (-10 feed split to 2, -8 to rails, -8 return)
Fore Billet Fuel Rails
Aeromotive A1000 1:1 Boost referenced Fuel Pressure Regulator with Autometer Autogauge Fuel Pressure Gauge
Custom FPR Mount Made by JETZ
Drivetrain/Rear-End
T56 with 26spline input shaft
SPEC Stage 3+ Clutch
Lethal Performance Billet TOB Sleeve
MGW Orange Handle Shifter
Cobra Bob Shifter Gaskets
Detent bolt spacer-mod
Steeda Clutch Quadrant
Steeda Firewall Adjuster
Steeda Adjustable Clutch Cable
Cobra Aluminum Driveshaft
Cobra Flange for Rear End
3.27 Gear
33 Spline Axles
Auburn Pro Differential
LPW "Ultimate 8.8" Diff Cover
Suspension
QA1 Tubular K-Member
QA1 Tubular A-Arms - Foxbody Length to tuck front wheels in a hair
UPR Black Coilovers 175lb Springs
Maximum Motorsports Caster Camber Plates (Custom top spacers CNC'd by JETZ)
UPR Solid "elite" Upper and Lower Control Arms (Lowers powdercoated Gloss Black by Cap42)
Strange 10 Way Adjustable Struts
Eibach Drag Springs
Air Lift Drag Bags
Appearance
20% Rear/ 35% Front Tinted Windows
DaleVHT'd Tail Lights
MeVHT'd Side Markers
VHT-needed 3rd Brake Light
HyperWhite LED's in License Plate housings
GT emblems replaced with tinted side marker turn signals
2003 Cobra Fog Lights
DDM Tuning 6000k 35W Slim Balast HIDs for Foglights
Smoked Headlights
DDM Tuning 6000k 35W Slim Balast HIDs for Headlights
17x9 Chrome Cobra Replicas with 275 tires
17x10.5 Chrome Cobra Replicas with 315/35/17 Toyo Proxes TQ Drag Radials
Shorty Antenna
2001 Cobra Front Bumper
v6 Rear Bumper
Interior
Autometer Steering Console Single Gauge Pod
PLX DM-6 Wideband Multigauge
PLX AF-R Sensor Module
Silver Trim Rings Around Factory Gauges
Few pics..
Shitty engine bay pic
Dyno..
Older dyno vid.. 4th gear for days..
I think thats it for now..
I picked up this 01 Bullitt from a member of IMBOC down in Pensacola, FL back in 2008. I'm technically the 4th owner as the original owner sold it at 100 miles to Sherman, the husband of the lady, Kelly, who I purchased the car from. The car had 12,731 miles on it when I picked it up but after the long haul home, tack on another 1,000 miles of fun. The couple that I bought the car from had everything I could want with the car, every stock piece plus a car cover, window sticker, original warranty/extended warranty info, as well as two magazines that featured articles on the Bullitt.
The car used to have a turbo on the stock motor which eventually popped one fine day at GLD, that resulted in the following build..
2001 Ford Mustang Bullitt #5317
--------
Power Adder
JLT "High Boost" Cold Air intake w/12" Filter Upgrade (03/04 Cobra model)
SCT BA3000 MAF
SCT xCal3 tuned by Drew @ D-Mark Performance
Tork Tech Polished TVS1900 w/"Big Dog" Inlet - Painted Wrinkle Black since the polish looked crappy.
Chisled Performance 6 Gallon Trunk Mounted Ice Tank
Engine
Teksid Block Setup Approx. 9.54:1
-Kellogg Forged Crank
-ModMax Forged I-beam Rods
-Manely 18cc Forged Pistons
-ARP Hardware Throughout
2v Heads ported by Paul Knippen
-Stainless Valves .5mm Oversized
-Tapered Nose Bronze Valve Guides
-Manley Nextec 125lb Seat Pressure Valvesprings
Tim Barth Custom KB Cams
Meziere Electric Water Pump
FRPP 4v Oil Pump and Pickup Tube
Fuel System
83lb Siemens Deka Fuel Injectors
Glenns Performance Triple Walbro Return Style Fuel Systems (-10 feed split to 2, -8 to rails, -8 return)
Fore Billet Fuel Rails
Aeromotive A1000 1:1 Boost referenced Fuel Pressure Regulator with Autometer Autogauge Fuel Pressure Gauge
Custom FPR Mount Made by JETZ
Drivetrain/Rear-End
T56 with 26spline input shaft
SPEC Stage 3+ Clutch
Lethal Performance Billet TOB Sleeve
MGW Orange Handle Shifter
Cobra Bob Shifter Gaskets
Detent bolt spacer-mod
Steeda Clutch Quadrant
Steeda Firewall Adjuster
Steeda Adjustable Clutch Cable
Cobra Aluminum Driveshaft
Cobra Flange for Rear End
3.27 Gear
33 Spline Axles
Auburn Pro Differential
LPW "Ultimate 8.8" Diff Cover
Suspension
QA1 Tubular K-Member
QA1 Tubular A-Arms - Foxbody Length to tuck front wheels in a hair
UPR Black Coilovers 175lb Springs
Maximum Motorsports Caster Camber Plates (Custom top spacers CNC'd by JETZ)
UPR Solid "elite" Upper and Lower Control Arms (Lowers powdercoated Gloss Black by Cap42)
Strange 10 Way Adjustable Struts
Eibach Drag Springs
Air Lift Drag Bags
Appearance
20% Rear/ 35% Front Tinted Windows
DaleVHT'd Tail Lights
MeVHT'd Side Markers
VHT-needed 3rd Brake Light
HyperWhite LED's in License Plate housings
GT emblems replaced with tinted side marker turn signals
2003 Cobra Fog Lights
DDM Tuning 6000k 35W Slim Balast HIDs for Foglights
Smoked Headlights
DDM Tuning 6000k 35W Slim Balast HIDs for Headlights
17x9 Chrome Cobra Replicas with 275 tires
17x10.5 Chrome Cobra Replicas with 315/35/17 Toyo Proxes TQ Drag Radials
Shorty Antenna
2001 Cobra Front Bumper
v6 Rear Bumper
Interior
Autometer Steering Console Single Gauge Pod
PLX DM-6 Wideband Multigauge
PLX AF-R Sensor Module
Silver Trim Rings Around Factory Gauges
Few pics..
Shitty engine bay pic
Dyno..
Older dyno vid.. 4th gear for days..
I think thats it for now..