Forum Register TCG Mobile Casino Live Posting Feed Garage Arcade Members List Calendar Search Today's Posts Mark Forums Read
Go Back   The Chicago Garage > The Garage > TCG Technical > The Blue Oval > Marauder Tech

User Tag List

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 05-21-2013, 11:12 PM   #1
 
03sport007's Avatar
 
Join Date: Aug 2011
Posts: 9
Casino cash: $4618900
0.00 per day
Default Need help please.

When I did my eaton swap I followed the Triolgy instructions (I think it's been awhile) and used black rtv to seal the blower to the lower intake. It's been 15k miles and I want to take it apart to see how much oil is in there (I kept my pcv) but I can't seperate them. It's like they are super glued together. Any ideas?
03sport007 is offline   Reply With Quote
Old 05-23-2013, 12:24 AM   #2
 
03sport007's Avatar
 
Join Date: Aug 2011
Posts: 9
Casino cash: $4618900
0.00 per day
Default

Quote:
Originally Posted by Blown3.8
I use a small screwdriver between on the corner where a bolt is so I don't make a ding on a critical sealing surface. To get a little gap as previously mentioned. Then take a razor blade and run it in the gap to cut the rtv. Once you get a few inches form the corner going on both sides then lifting the blower will keep tearing the rtv.

Just make sure you flaten the spot where you put the screwdriver before it goes back together or it might not seal the next time around.

I also like using loctite flange sealant. Its not sticky like RTV so it comes apart later. But you have to have thick flanges like on an eaton. It doesn't work so well on the trilogy plate cause its thin.


That was the ticket. Did a little grinding to a screw driver to make it thinner and got aggressive on a non sealing area. Worked a couple areas and it finally popped!!!! Thanks
__________________
03 SB 300B

Eaton Swap Tuned by Fast Specialities

Trans rebuilt by Darin at BC Automotive with a Triple Disc 11in Circle D TC. Tuned by Zack. The man that made my Marauder fun again.

4.10 gears with Cobra clutches. No more one wheel peel

Metco Drive Shaft Loop.

Next bigger brakes!!!!
03sport007 is offline   Reply With Quote
Old 05-23-2013, 05:54 AM   #3
 
musclemerc's Avatar
 
Join Date: Jan 2010
Posts: 554
Casino cash: $7378400
0.16 per day
Default

I would love to see some pics of the lower intake after you get done.

Did you plug the pcv connector at the bottom of the SC?
__________________
TVS Powered Marauder
musclemerc is offline   Reply With Quote
Old 05-23-2013, 09:29 AM   #4
 
03sport007's Avatar
 
Join Date: Aug 2011
Posts: 9
Casino cash: $4618900
0.00 per day
Default

Quote:
Originally Posted by musclemerc View Post
I would love to see some pics of the lower intake after you get done.

Did you plug the pcv connector at the bottom of the SC?

Yes the bottom of the lower intake is plugged. I'll get some pictures but everything is pretty much coated in oil. I'll be installing a catch can.
03sport007 is offline   Reply With Quote
Old 05-23-2013, 10:16 AM   #5
 
massacre's Avatar
 
Join Date: May 2011
Posts: 158
Casino cash: $4713700
0.05 per day
Default

Anyone have the torque sequence/specs for installing the blower back onto the lower? I keep getting conflicting information.
massacre is offline   Reply With Quote
Old 05-23-2013, 04:44 PM   #6
 
musclemerc's Avatar
 
Join Date: Jan 2010
Posts: 554
Casino cash: $7378400
0.16 per day
Default

I can get it for you when I get home Rob
musclemerc is offline   Reply With Quote
Old 05-23-2013, 07:21 PM   #7
 
massacre's Avatar
 
Join Date: May 2011
Posts: 158
Casino cash: $4713700
0.05 per day
Default

Thanks, Travis!
Much appreciated!
massacre is offline   Reply With Quote
Old 05-23-2013, 10:47 PM   #8
 
musclemerc's Avatar
 
Join Date: Jan 2010
Posts: 554
Casino cash: $7378400
0.16 per day
Default

Here you go Rob, this is the same for either (lower intake to cylinder head, and SC to lower intake)

DS

4-----8-----2-----6-----10

/B
/A-------------Lower Intake------- Torque to 89 In Lbs
/C
/K
3-----7-----1-----5------9

PS
musclemerc is offline   Reply With Quote
Old 05-25-2013, 01:43 PM   #9
 
massacre's Avatar
 
Join Date: May 2011
Posts: 158
Casino cash: $4713700
0.05 per day
Default

Thanks a lot Travis!

Will this work for Terminator setup or is this just for the Trilogy?
massacre is offline   Reply With Quote
Old 05-25-2013, 01:47 PM   #10
 
musclemerc's Avatar
 
Join Date: Jan 2010
Posts: 554
Casino cash: $7378400
0.16 per day
Default

Yep!!!!
musclemerc is offline   Reply With Quote
Old 05-25-2013, 02:46 PM   #11
 
massacre's Avatar
 
Join Date: May 2011
Posts: 158
Casino cash: $4713700
0.05 per day
Default

Great, thanks!

I just got A free gasket last night from a friend who went KB.
massacre is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 06:36 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
User Alert System provided by Advanced User Tagging v3.0.6 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
no new posts