Eaton Swappers, check this out!
Looky here. Crossover Delete...Yummy - 2003-04 Mach 1 Registry Owners Club
On a Marauder, you would connect the lower radiator hose directly to the coolant/oil adapter on the drivers side of the block.
Thermostat housing would be eliminated, as well as the hose on the bottom of the COT.
Connect that piece of magic pictured to the upper radiator hose, make some lines and plug the cooling mod port.
Then, do what Siege did and route your cooling mod hose directly to the heater core.
SO MUCH WIN!
Looky here. Crossover Delete...Yummy - 2003-04 Mach 1 Registry Owners Club
On a Marauder, you would connect the lower radiator hose directly to the coolant/oil adapter on the drivers side of the block.
Thermostat housing would be eliminated, as well as the hose on the bottom of the COT.
Connect that piece of magic pictured to the upper radiator hose, make some lines and plug the cooling mod port.
Then, do what Siege did and route your cooling mod hose directly to the heater core.
SO MUCH WIN!