• đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.

Let the 2013 build begin!

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
2012-01-14_22-23-48_470.jpg


Start up funds in hand... now to get busy!

Replacement Heads (destroyed my old valves and seats)
Replace all destroyed covers and fab work for oiling
Re-gasket and bearing the motor
While its down that far, might as well cam it, DUH!

Build thread starts as soon as parts start showing up!
 
Last edited:

Chester Copperpot

Unvaxxed Untermensch
TCG Premium
May 7, 2010
39,411
40,189
Blanco el Norte
What size block you have? If it's the stock 346 the LS3 heads won't work unless you get the ones made by Mast Motorsports. http://www.mastmotorsports.com/2010/product-view.php?cat=Cylinder Heads - Assembled&id=360. You need a 4" bore or larger and the LS3/L92 heads will work.

The LS3 and L76 intakes are mechanically and functionally identical except the LS3 MAP screws in and has a different wiring harness whereas the L76 MAP sensor will plug and play into LS1/2 harness'.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info