Im working on some rear suspension mods right now, and need a little assistance with the welding. The lower mounts will be hacked off, and replaced with brackets that need to be welded to the axle tube. They are 1/8" mild steel, and look exactly like this:
Trying to add some more adjustability to my setup, without buying another pair of shocks if I want to lower/raise it, it will have more clearance against the frame side so I can run a coilover without the spring rubbing, and the bottom of the shock will be moved further back to correct the crazy 25* they are mounted at.
Will compensate with beer/food/money/sexual favors/whatever. Your choice.
Trying to add some more adjustability to my setup, without buying another pair of shocks if I want to lower/raise it, it will have more clearance against the frame side so I can run a coilover without the spring rubbing, and the bottom of the shock will be moved further back to correct the crazy 25* they are mounted at.
Will compensate with beer/food/money/sexual favors/whatever. Your choice.
