Which spacers?

[Jimy Bilmo]

Which spacers to buy when running the 17x10.5s in the rear. Can't remember for the life of me which ones I ran on my 2003.

Click to read more...

 

[sonicblue2003]

if its not lower u dont need any. I am running mine with no spacers without an issue

 

[Jimy Bilmo]

going to be running H&R race springs...

 

[trueblue01gt]

the ones i bought from you were 1"

 

[ChromeCobra]

You shouldn't need a 1", that seems too big.

 

[03GTGreen]

Plus youll pry have to get the fenders rolled again if you get a 1" spacer! Better take my shit with you when you get your shit rolled though!

 

[imported_04 cobra]

I believe 3/8's spacers with new lug nuts which a have and want to get rid off. would like $60 for it all. Paid close to $100.

 

[Jimy Bilmo]

That's what I was running on my 03, 3/8". Thanks guys.

The 1" ones I had were from a previous application I was considering when I was going to do a solid.

 

[BlaqSnake]

How about replacing the IRS bolts with low profile bolts?

No spacers need then.

 

[ITLLOWNU]

or just grind down the head of the bolt..take half off and your golden

it only matters when the car is off the ground anyway..under its own weight there should be plenty of clearence..lowering will only help too cause it will widen the stance a little. that was from my experience with the IRS:burnout:

 

[stunuts]

there 3/8's but please, please, pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee put open lugs on the damn car....at a minimum!!!!!!!!!!!!!!!!!!!!!!!

 

[Wiked03]

or just grind down the head of the bolt..take half off and your golden

it only matters when the car is off the ground anyway..under its own weight there should be plenty of clearence..lowering will only help too cause it will widen the stance a little. that was from my experience with the IRS:burnout:

+1 :biggthump