Anyone have Hans phone nubmer

[sonicsaleen]

anyone have hans phone number i want them to check out my twin turbo cobra. Tired of messing with it.

Click to read more...

 

[IZZy]

look in the sponsors section

 

[01Sleeper]

630-584-9530

 

[sonicsaleen]

honestly i dont know who he is or who he works for i just heard good things about him.

 

[Logan@DeansPerformance]

honestly i dont know who he is or who he works for i just heard good things about him.

he owns deans performance


WWW.DEANSPERFORMANCE.COM

 

[sonicsaleen]

found it thanks

 

[sonicsaleen]

turbos are leaking bad after rebuild and install of scavenger pump. Tired of messing with it, letting the pros deal with it now then im selling it and getting back into a twin screw.

 

[Bigturbonotch]

is it blowing through the seals on the turbo? if so you might want to look into a oil restrictor for the feed line to the turbo......pretty easy fix

 

[Bigturbonotch]

or your return line might be too small...

 

[FuelSlut]

turbos are leaking bad after rebuild and install of scavenger pump. Tired of messing with it, letting the pros deal with it now then im selling it and getting back into a twin screw.

Wow! I have heard this before, a tt setup going back to TS. Turbos are great but a PITA. Good Luck I heard good things about Hans, he can fix it.

 

[sonicsaleen]

I have a restrictor before the T on the feed line a .065 and still making a mess with -12 return. Im done messing with it. Talked to hans today and they are backed up for a month. Looking for somewhere else to take it now.

 

[Zack]

I have a restrictor before the T on the feed line a .065 and still making a mess with -12 return. Im done messing with it. Talked to hans today and they are backed up for a month. Looking for somewhere else to take it now.

Put breathers on your valve covers if you havent already.

Also, the return line CAN NOT dip below the actual bung in the pan. It has to flow straight down into the return fitting.

Good luck

 

[batman]

Put breathers on your valve covers if you havent already.

Also, the return line CAN NOT dip below the actual bung in the pan. It has to flow straight down into the return fitting.

Good luck

its prolly backing up on the drain....too low or smashed

 

[sonicsaleen]

i have breathers and there are no kinks. I took it to CRE. Inc. he will fix it.