đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.
kinda hard to say sorta like a pinging but it goes away after start up and then sometimes comes back i think its the bottom billetflow idler or maybe the belt might just replace both
kinda hard to say sorta like a pinging but it goes away after start up and then sometimes comes back i think its the bottom billetflow idler or maybe the belt might just replace both
Get yourself a set of BF double bearing idlers I replaced the POS factory ones already....if you have an idler wobbling on you get it was replaced before it goes south and grenades on you
If its like a screeching or whistling, its a bearing. replace it before the bearing siezes and chuck's the pulley right off. no fun when you're on the side of the road, especially since you will lose that fancy BF pulley.
Get yourself a set of BF double bearing idlers I replaced the POS factory ones already....if you have an idler wobbling on you get it was replaced before it goes south and grenades on you