first i just want to take this opportunity to thank a fellow boardie, Blown318, for digging his trailer out of snow, getting completely soaked to trailer my car up to michigan. it was a HUGE help and hes a hell of a guy for not only digging it out of snow but putting up with my constantly changing plans the past few weeks. so thanks chris, again i really appreciate it man!
also wanted to again thank hans and bob for getting my car running and to where its at today, you guys are THE best at what you do!
this "project" is two years in the making and has been a pretty awful experience but all that went away the first time i started it. it ended up being about $10,000 more than i originally planned and im still paying a lot of this off unfortunately. so any way heres a little list of things that i can remember:
VT 302 race long block w/ turbo grind cams and p+p heads and moroso oil pan
THP 57mm twin turbo kit
weldon return style fuel system w/ dial-a-flow and 75lb injectors
built solid rear w/ 3.55 gears and 31 spline axles
qa1 rear coilovers
mm subframe connectors
qa1 front coilovers and k-member
dfx clutch
fidanza aluminum flywheel
liberty input shaft
black 03 cobra wheels 17X9 F 17X10.5 R
hoosier 335 drag radials out back
steeda tri ax shifter
autometer boost, fuel pressure, oil pressure, wide band guages
blitz boost controller
moroso battery relocation kit
bmr rear adjustable upper and lower control arms
ligtning 90mm MAF
im sure theres more little stuff here and there that i forgot but thats the most of it! anyway onto some pics which arent the best because i used the ancient camera from my old work.
also wanted to again thank hans and bob for getting my car running and to where its at today, you guys are THE best at what you do!
this "project" is two years in the making and has been a pretty awful experience but all that went away the first time i started it. it ended up being about $10,000 more than i originally planned and im still paying a lot of this off unfortunately. so any way heres a little list of things that i can remember:
VT 302 race long block w/ turbo grind cams and p+p heads and moroso oil pan
THP 57mm twin turbo kit
weldon return style fuel system w/ dial-a-flow and 75lb injectors
built solid rear w/ 3.55 gears and 31 spline axles
qa1 rear coilovers
mm subframe connectors
qa1 front coilovers and k-member
dfx clutch
fidanza aluminum flywheel
liberty input shaft
black 03 cobra wheels 17X9 F 17X10.5 R
hoosier 335 drag radials out back
steeda tri ax shifter
autometer boost, fuel pressure, oil pressure, wide band guages
blitz boost controller
moroso battery relocation kit
bmr rear adjustable upper and lower control arms
ligtning 90mm MAF
im sure theres more little stuff here and there that i forgot but thats the most of it! anyway onto some pics which arent the best because i used the ancient camera from my old work.
(damn hoosiers + wet snow + diamond plate ramp + bad driver 
