-
đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.
Need Help!
- Thread starter FuelSlut
- Start date
Put some ass into it.
Or you could just cheat and put a cheater bar on the allen wrench.
I use a 1/2" breaker bar.
From the passanger side of the car, hold the KB tool with your left hand, almost flat on the engine. Then use the breaker bar almost vertical in the air.
Pull up on the KB tool while giving a nice big pull on the breaker bar and it should bust loose.
Remember to torque the new pulley on.
If your close to Carol Stream, I can give you a hand.
Kevin
From the passanger side of the car, hold the KB tool with your left hand, almost flat on the engine. Then use the breaker bar almost vertical in the air.
Pull up on the KB tool while giving a nice big pull on the breaker bar and it should bust loose.
Remember to torque the new pulley on.
If your close to Carol Stream, I can give you a hand.
Kevin
Thanx the breaker bar I used worked great, it gave me good leverage on the 10mm allen wrench. :biggthump
Thread Info
-
Created -
3Replies
-
262Views
-
Participants list
-
