Is this a good or bad spot to jack the car up?

[Mr. Unknown]

I need to get the car up so I can take the rotors in the get them re-surfaced. I might paint the Calipers in the process. Any help guys/gals?

Click to read more...

 

[qwik01cobra]

I don't see why not. Thats were I put my jackstands when I lift my car. :biggthump

 

[CobraSusie]

it'll be fine, thats a safe enough place

 

[Mr. Unknown]

thanks guys.

 

[01GTvert]

Might be kind of awkward if you plan on lifting the entire back end at once (I used the pumpkin) but if you're going to do one side at a time it should be fine.

 

[01Sleeper]

Might be kind of awkward if you plan on lifting the entire back end at once (I used the pumpkin) but if you're going to do one side at a time it should be fine.

They say to never jack the rear by the pumpkin, it can cause it to break, it is only aluminum. Just a little heads up

 

[Mr. Unknown]

If i were gonna lift the back end up i would put jack stands under the sub frame connectors up first. I jack the back end up from the dampener right infornt of the Differental. I think if i were to go ahead and jack the rear end of the car up how the jacks are now it'd be bad. 1 becasue i'd need another jack :laughing2 and 2 i think the car would fall off the jacks.