Ford Racing intake for 03-04 Cobra NEW?

[ChicagoMike]

http://www.fordracingparts.com//parts/part_details.asp?PartKeyField=8274

http://www.seanhylandmotorsport.com/online/product_info.php?products_id=1766

check this out, it is on ford racings site as well. Has the tech of the FIPK kit but a filter that has more surface area (hollowed out center) and a BOX, plastic clear removeable top ... and inlet pipe! If this is truely for our cars, this could be one of the best intakes out there and I'll drop my FIPK for it....


*UPDATE*

S&B filters tells me the filter on the kit runs 700 CFM. Maybe the filter IS too small, I found this on Modfords: "The stock K&N filter flows 1000 cfm and is probably good for applicaltions up to 16-17 psi, any more than that it will start to restrict flow and its a good idea to get a bigger filter."

Click to read more...

 

[cobravenom39]

http://www.fordracingparts.com//parts/part_details.asp?PartKeyField=8274

http://www.seanhylandmotorsport.com/online/product_info.php?products_id=1766

check this out, it is on ford racings site as well. Has the tech of the FIPK kit but a filter that has more surface area (hollowed out center) and a BOX, plastic clear removeable top ... and inlet pipe! If this is truely for our cars, this could be one of the best intakes out there and I'll drop my FIPK for it....

That's pretty sharp, but I think I still like my 12"JLT CAI more. If I wasn't running 19psi I probably would go with it.

 

[hj16]

For $225 there are much better choices.

 

[The Pun]

That's pretty sharp, but I think I still like my 12"JLT CAI more. If I wasn't running 19psi I probably would go with it.

Ditto but I run 17psi.

 

[ChicagoMike]

Trying to find out more about it, because I have a feeling that what is pictured isn't actually what it comes with. I will follow up on this unless somebody else beats me to it.

 

[Wiked03]

That filter looks a little... ummm ...stubby. I will stick with my K&N.

 

[ChicagoMike]

Confirmed hole is supposedly on the fender side as well as the front. Winner.

Install details here so you can see the box: http://www.arsrecordings.com/75-2545.pdf


For those concerned about the small filter, the inside of the filter has filter element, it's got a hole down the center. That should make up for the size, should be comparable to the FIPK with cooler intake temps when it gets hot and a smoother line to the TB. WINNER!!!!

 

[Since 1964]

Thank you....Imo buy dat sucka!

 

[ChicagoMike]

So far, the S&B filter it comes with claims that it flows higher than a K&N filter. I am awaiting a call back from S&B tech to find out the flow rate of the filter that comes with the 03-04 cobra kit.

 

[ChicagoMike]

*UPDATE*

S&B filters tells me the filter on the kit runs 700 CFM. Seems like the filter IS too small, I found this on Modfords: "The stock K&N filter flows 1000 cfm and is probably good for applicaltions up to 16-17 psi, any more than that it will start to restrict flow and its a good idea to get a bigger filter."

 

[Wiked03]

*UPDATE*

S&B filters tells me the filter on the kit runs 700 CFM. Seems like the filter IS too small, I found this on Modfords: "The stock K&N filter flows 1000 cfm and is probably good for applicaltions up to 16-17 psi, any more than that it will start to restrict flow and its a good idea to get a bigger filter."

See.... it's too stubby... just like I said. :joke: