Clutch Bolt Part Numbers & Cooling Mod Part Numbers

[hj16]

Clutch bolt part #s

Original Ford #s
N808969-S100 quantity 6 Pressure plate to flywheel (should be replaced)
F6ZZ-6379-AA quantity 8 Flywheel to crankshaft
N800594-S100 quantity 4 Driveshaft to flange

--------------------------------------------------------------------------
Apten cooling mod part#s

Ford # XR3Z-18B402-DA
2 feet of 3/4in heater hose
1 3/4inch brass or plastic Tee fitting with barbs on all 3 ends
4 Stainless worm gear clamps

Click to read more...

 

[Flyn]

The brass Ts are available here:

http://www.cornerhardware.com/item_262810/Merrill/Merrill/3/4-Brass-Tee.html

Lyle said you have to buy at least 2 so find a friend...

 

[ChicagoMike]

Ummm.. support LDC ... buy the cooling mod from Cliff, Lyle and Dan ... SUPPORT THEM!!!!

Clutch bolt part #s

Original Ford #s
N808969-S100 quantity 6 Pressure plate to flywheel (should be replaced)
F6ZZ-6379-AA quantity 8 Flywheel to crankshaft
N800594-S100 quantity 4 Driveshaft to flange

--------------------------------------------------------------------------
Apten cooling mod part#s

Ford # XR3Z-18B402-DA
2 feet of 3/4in heater hose
1 3/4inch brass or plastic Tee fitting with barbs on all 3 ends
4 Stainless worm gear clamps

 

[hj16]

Ummm.. support LDC ... buy the cooling mod from Cliff, Lyle and Dan ... SUPPORT THEM!!!!

Look at the date. This was originally Lyle's post that I made into a sticky....




But yes, now buy from LDC, their kit dominates anything remotely familiar to the Apten Kit :headbang:

 

[ChicagoMike]

doh, sorry!

Look at the date. This was originally Lyle's post that I made into a sticky....




But yes, now buy from LDC, their kit dominates anything remotely familiar to the Apten Kit :headbang: