Remove the plastic intake tube from the TB
Remove both Coilcovers
Pull out the black dealies (just pull, it just pops off the plugs)
Grab a 1/4" drive socket wrench with a big extension and unscrew the plugs.
Stick the black dealies back onto the plugs to pull them out.
use a paper towel to snugly fit the new plugs onto the socket
Gently turn the plugs with just using your fingers turning the extension (DO NOT USE A DRIVE0
Once they are threaded you can use the drive
Proceed to screw the plug in until you get pressure. Once you get pressure go NO MORE than a 1/4 turn.
Stick the Black dealies back in and on
Put the coil covers back on
Put the intake tube back on
Fire car up
Only takes me about 15-20 minutes to do all 8