• đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.

long wheel studs

Dana

Bluesmobile
Mar 2, 2004
2,619
0
I just installed Moroso # 46185 in the front's.
I am told they are the same for the rear.
This number has the flat cut in them for easier installation on the front hubs.

It lists them as a .590 dia knurl. 1/2 in-20 X 3 inch long.
They fit the hole correctly.

The larger diameter you listed may be too big??

Dana
 

Dana

Bluesmobile
Mar 2, 2004
2,619
0
Knurl
 

Attachments

  • 46185_part.jpg
    46185_part.jpg
    12.8 KB · Views: 54
C

cobrachris

Guest
are these the studs to use when running front runners with spacers?? Also do the stock lugs work on the stock rims or no; is it possible that if the stock lugs dont work could you cut the tip of that stud of so you can then fit the stock lugs on that stud???? just wondering wanted to run skinnies. :burnout:
 

Dana

Bluesmobile
Mar 2, 2004
2,619
0
Yes, these or some other 3 inch studs can be used for the front with spacers, although if you read the package, Moroso does not recommend using them with spacers.

These studs are 1 inch longer than stock, and the stock lug nuts won't work. They are too shallow.
To use the stock wheels with the longer studs, you will have to get taller nuts or open ended nuts.

Dana
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info

  • ShelbyGuy
    Created
  • 6
    Replies
  • 406
    Views
  • Participants list