Forum Register TCG Mobile Casino Live Posting Feed Garage Arcade Members List Calendar Search Today's Posts Mark Forums Read
Go Back   The Chicago Garage > The Garage > TCG Technical > The Blue Oval

User Tag List

LinkBack Thread Tools Search this Thread Display Modes
Old 09-08-2012, 09:03 PM   #1
G_T_P's Avatar
Join Date: May 2009
Posts: 2,301
Casino cash: $5646600
0.62 per day
Default Need some help ford guys!

Hey guys at the house I have a 98 explorer with the 4.0 ohv engine. It came in with a p0340 camshaft sensor circuit A (or single sensor). So after doing a little diag I decided to pull the cam sensor off the synchronizer and found that the magnet broke off the sensor and in return bent the pickup for the hall effect sensor. Also the cam sensor connector was damaged so I got a connector repair kit from ford and fixed that as well. So I ordered the synchronizer and sensor and put it in. I followed Alldatas instructions to have the synchronizer 15 degrees off the centerline of the engine to the right. But the code keeps coming up. I have no clue if maybe its not timed right or what? I did some research and found that if the voltage regulator on the alternator goes bad it can set that code off because of the mixed voltages. The alternator on this is maybe 8 months old. Any ideas would help thank you!
G_T_P is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
User Alert System provided by Advanced User Tagging v3.0.6 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
no new posts