• đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.

Belt size help

blck10th

TCG Elite Member
Jan 11, 2007
17,965
24
http://www.stangshiftergaskets.com/belt_selection_guide.htm


2.76 4 lb. 3-100mm
1-90mm 3.2" Tensioner not notched K080806



2.80 4 lb. 3-90mm
1-100mm 3.2" Lower idler in upper position K080810

.040 when it comes to the length of the belt don't mean shit. most people dont know how much that really is plus you have 2mm larger on a ideler which is .078 so your belt would be .038 to short if you use belt for the 2.8

buy the 080810 from NAPA put it on do not start the car. they will take it back. then order from www.rockauto.com and pay half the price
 

sleepercobra

Regular
Aug 14, 2009
362
0
http://www.stangshiftergaskets.com/belt_selection_guide.htm


2.76 4 lb. 3-100mm
1-90mm 3.2" Tensioner not notched K080806



2.80 4 lb. 3-90mm
1-100mm 3.2" Lower idler in upper position K080810

.040 when it comes to the length of the belt don't mean shit. most people dont know how much that really is plus you have 2mm larger on a ideler which is .078 so your belt would be .038 to short if you use belt for the 2.8

buy the 080810 from NAPA put it on do not start the car. they will take it back. then order from www.rockauto.com and pay half the price


thank u, i was just trying to make sure its the K080806, thought some of you may be running something else to help belt slip.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info

  • sleepercobra
    Created
  • 3
    Replies
  • 690
    Views
  • Participants list