Fuel question?

[peach76]

I have a 2.93 pulley and c&l intake and plan to install full exaust and 60# injectors. My question is, do I need to upgrade the fuel pump also or not nessesary with those mods?
Thank you for all input

Click to read more...

 

[Zack]

Boost a Pump and you will be set.

 

[peach76]

I'm new to this car. Boost a pump?

 

[joesfiddy]

i have just about the same mods and i dont think u will need 60# injectors or any other fuel mod with what your running now

 

[peach76]

What if I went down to a 2.8 pulley?

 

[FuelSlut]

What if I went down to a 2.8 pulley?

No. even with a 2.8 pulley you dont need to upgrade anything with the fuel system not even the injectors, all that can stay stock. Thats the beauty of these cars!

2.8 pulley intake full exhaust you can expect 470-480 rwhp.

You need to strart upgrading your fuel system when you start dipping into ported blowers, and kenne bell or whipple upgrade. Than its a must.

Boost a pump is made by Kenne Bell and instead of upgrading your stock fuel pumps wich can take alot of power all the boost a pump does is boost your pumps voltage. This is needed when running a ported blower or twin screws like I stated above.

 

[peach76]

Thanks alot for your input! greatly appricated!!:biggthump

 

[bmxer89]

Doubt it Kurgans said i will be fine on the whole stock fuel system with a 2.76

 

[FuelSlut]

Doubt it Kurgans said i will be fine on the whole stock fuel system with a 2.76

Bob will tell you exactly what I stated above! And he's tuned my car a handfull of times. I had this car over 6 years I think I know what works and what doesn't .

 

[sonicblue2003]

i got a 2.76 cai mid pipe and cb with all stock fuel syatem no issues...

 

[FuelSlut]

i got a 2.76 cai mid pipe and cb with all stock fuel syatem no issues...

enough said.

 

[peach76]

thanks again for the info! greatly appricated!