How much do these cars weigh?

[Rotzs99]

Just curious as to the weight of these cars from the factory:

Terminator Coupe
New Edge Coupe
Fox Body Coupe

Thanks for the help.

Click to read more...

 

[Ear Rak]

well my new edge gt weighs 3300 even with a half tank of gas in it

 

[Mean Mr Mustang]

My Cobra weighs a little over 3600.

The 86 lx, which only had ac on it from the factory weighed 2986. This car weighed considerably less than most others since it was literally stripped down, so you could add another 200 or so to get a more accurate number. The coupes also weighed a little less than the hatch did.

 

[hj16]

Just curious as to the weight of these cars from the factory:

Terminator Coupe
New Edge Coupe
Fox Body Coupe

Thanks for the help.

3665
3450~
17 toothpicks

 

[Fast99Snake]

99-01 cobras weighed a little over 3400
new edge gts weigh about 3300
and foxes weigh just under 3k i believe, depending on model

 

[tgentry]

My '96 Cobra (even though you didn't ask about SN95's) with rollbar and a quarter tank of gas, no spare, was 3467.

 

[Rotzs99]

My '96 Cobra (even though you didn't ask about SN95's) with rollbar and a quarter tank of gas, no spare, was 3467.

I spose mine would be very close to that, cept with the IRS.

Thanks for the help guys.

 

[tgentry]

I didn't weigh it after installing the IRS, but weighed everything coming out and going in. Looked like an '04 IRS with MM diff bushings and a Steeda rear brace added just over 80lb.

 

[Fast99Snake]

yeah the irs is supposed to add somewhere in the are of 75 lbs so that sounds rite

u lose 125 lbs of unsprung weight tho :biggthump

 

[tgentry]

I ended up selling the car before I got it sorted out. I had terrible oversteer, but I'm sure it just needed some tweaking.

On a very rough road I drive to work I completely lost the rear end hop though. :biggthump

I'm still deciding if I want to do it again, or just go with EVM's 3 Link.

 

[FR 500 HAND BUILT]

haha mine (98 gt) is at 2300 pounds!!!!!! that is with a half tank of gas too!!!!











warning-- no motor or trans so flame suit on! :laughing2

 

[tgentry]

Good thing I saw your note that it's just a roller. I was imagining something resembling swiss cheese! :biggthump

 

[FR 500 HAND BUILT]

Good thing I saw your note that it's just a roller. I was imagining something resembling swiss cheese! :biggthump

I actually want it with the motor and trans in it around 2900 or so- that would make it n/a 375 or so at 3,000 pounds with me and gas! that would be a screamer! :headbang:

 

[Mr. Unknown]

I HOW HEAVY MY COBRA IS!

Time for som weight reduction mods. I didn't know the new edge GT's were only 3300 lbs ish.

 

[FR 500 HAND BUILT]

I HOW HEAVY MY COBRA IS!

Time for som weight reduction mods. I didn't know the new edge GT's were only 3300 lbs ish.

mine from the factory in 98 was 3065 pounds, I am adding the 4v but did the tubular front end and also the aluminum block- so i think i came out even :clap:

 

[tgentry]

Someone's scales are lieing. I don't believe there is a 400 lb. difference between SN95 GT and Cobra.

 

[cap42]

My Gt was 3330 factory stock w/ half tank of gas