Titan Motorsports Copper Supra rebuild for 2012 *pic heavy*

Mook

Mr. Manager
Staff member
Admin
May 23, 2007
207,180
119,018
Elgin
Real Name
Mike
as seen in this thread

http://www.nagtroc.org/forums/index...build-for-2012-going-for-the-worlds-quickest/

After a lot of discussion we decided to rebuild the Titan Motorsports Copper Supra for 2012. So as usual we are logging a lot of pictures and developing some new items and parts for these cars that will be built on the Titan Motorsports Copper Supra. As many of you are aware, we had a minor accident at TX2K11 in the finals of the Drag Race. In an effort to update the safety aspects of the car as well as repair the vehicle we decided to build the car from the ground up. This will entail more work then just repairing the vehicle, but the end goal is to have the fastest and quickest Street Supra's as well and one the nicest ones to hit the drag strip. The first build on this car was in 2001-2002 so its only fitting for this car to get a rebuild as it won a lot of races for a decades time. Now its time to update it so it should hopefully be a leader and stand out car for the Supra community for another decade.

Here are a few pictures of the car after the accident, we put a stock Supra wheel and suspension on it, to get it out of the trailer and into the shop. The fender of course came off. We start the stripping process here.

Titan-Supra-Rebuild-0001.jpg


Titan-Supra-Rebuild-0002.jpg


Titan-Supra-Rebuild-0003.jpg


Titan-Supra-Rebuild-0004.jpg


Titan-Supra-Rebuild-0005.jpg


Titan-Supra-Rebuild-0006.jpg


Titan-Supra-Rebuild-0007.jpg
 

Mook

Mr. Manager
Staff member
Admin
May 23, 2007
207,180
119,018
Elgin
Real Name
Mike
Titan-Supra-Rebuild-0021.jpg


Here we decided to modernize the engine bay, which we do now on a lot of show cars. Complete welding and cleanup of the engine bay so that all the panels are smooth when painted. This is a lot of effort, but to get the best show look in an engine bay, its a must. Approximately 100 holes will be closed up. These holes are from things like the factory air intake, wiring harness clips, bolt holes for various factory pieces that are removed.

Titan-Supra-Rebuild-0022.jpg


Titan-Supra-Rebuild-0023.jpg


Titan-Supra-Rebuild-0024.jpg


Titan-Supra-Rebuild-0026.jpg


Titan-Supra-Rebuild-0027.jpg


Titan-Supra-Rebuild-0028.jpg


Titan-Supra-Rebuild-0029.jpg


Titan-Supra-Rebuild-0030.jpg


Titan-Supra-Rebuild-0031.jpg


Titan-Supra-Rebuild-0034.jpg


Titan-Supra-Rebuild-0035.jpg
 

Mook

Mr. Manager
Staff member
Admin
May 23, 2007
207,180
119,018
Elgin
Real Name
Mike
Titan-Supra-Rebuild-0038.jpg


Titan-Supra-Rebuild-0040.jpg


Had a custom dash made, so that it can be fitted and give the car a good look and feel; made to fit/look like the OEM dash. We had a factory dash before and the structure is really "floppy" when there is nothing underneath holding it together. Always has been an irritation for me, so this dash fixes that problem.

titan-carbon-supra-dash-1.jpg


titan-carbon-supra-dash-2.jpg


titan-carbon-supra-dash-4.jpg


Titan-Supra-Rebuild-0042.JPG


Titan-Supra-Rebuild-0043.JPG


Titan-Supra-Rebuild-0044.jpg


Titan-Supra-Rebuild-0048.jpg


Titan-Supra-Rebuild-0049.jpg


Titan-Supra-Rebuild-0050.jpg


Titan-Supra-Rebuild-0053.jpg


Titan-Supra-Rebuild-0054.jpg


Titan-Supra-Rebuild-0057.jpg


Titan-Supra-Rebuild-0058.jpg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info