Not sure about the description 2" per foot but if your talking about some kind of tapered reamer then i may have one at work. I would need the ball joint that you are installing to get an accurate size/ dimension
Well, I'm making some new control arms. The new ball joint is way beefier than the stocker even though it's the same taper. So I need to ream it out to accept it.
Should be a 10 degree taper.
"The 2" per foot reamer, also known as a 10° tapered reamer, works with our ball joints 917-20032, 917-20038, 917-20038-1, and 917-20039. Measures a little more than 1/2" at the small end and 1" at the big end.