this jeep. i want it

bikrboy128

Some say.....
TCG Premium
Jul 15, 2007
12,895
11,599
Wheaton
dsc01079s.jpg

dsc01081o.jpg

dsc01078wt.jpg

dsc01090qk.jpg

dsc01112cr.jpg

dsc01108e.jpg



6 inch long arm lift, 35x12.5s, 4 link dana 60 out back, 4:88 gears, atlas 2 speed transfer case.
:wackit:
 

clint282cc

TCG Elite Member
Nov 4, 2011
1,545
0
Are you sure thats a dana 60? Looks pretty close to a dana 44a which comes stock. The 44a has an aliminum center section which is why they truss the axle (like the one in picture) because they cant weld the tubes to the diff. BUT the 44a has the same ring and pinion as a 60. Making the axles the only week point.

Its just hard to believe someone would put a 60 in the rear and leave the stock 30 in the front when the 44a is good up to like 37s and the 30 is... Not. Also, those lower control arm brackets look like factory stamped steel... Same with the shock mount. My guess is someone bought a long arm kit ad bolted it on... The truss probably comes with some kits because it has a A-arm on the top from the factory.

It is a sweet lookin jeep though! Probably a mall crawler but has some good potential. Out west not man people run mud tires because they dont have mud haha and a/t tire get the job done on the rock. And what do i know? Im looking at the pics on my phone haha
 

clint282cc

TCG Elite Member
Nov 4, 2011
1,545
0
This is a mall crawler for sure. Hes running CV axles... Those snap even with an open diff! (I broke 3 this year). Anyone who actually wheels know you need the ujoint axles. That atlas is WAY OVERBOARD and is probably his solution to get rid of the AWD t-case that was in it.

I think those only go for like 2000, not 4. But i could be wrong...
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info