HOLY FUCK.
heres the 1/4 thread... http://www.lightningrodder.com/forum/showthread.php?t=54108
heres the original build thread...
http://www.lightningrodder.com/forum/showthread.php?t=42509&page=2
and link to the vids...
fuck.
http://www.streetfire.net/video/casey02l-new-pb-twin-67s_2082785.htm
i wanna trap 120 in the 1/4... let alone the 1/8th...
My single 88mm setup is sold, and I just ordered a set of 67's so its time for a new build thread
Im waitng on parts to finish rebuilding my motor after a wrist pin failure. It will be a standard iron block, Manley Rods and Pistons. Out of the box set of 38cc Trick Flows, Comp/MMR Stg3 Turbo Cams. Going to be moving my Victor JR intake and elbow to the new build. Keeping the same front mount A/A intercooler.
I decided to be the guinne pig and ordered a set of Treadstones cast manifolds; hopefully the short distance from the exhaust ports, and the heat retention of the cast manifolds will spool the 67's fairly quick.
I ordered a set of Precision Billet wheeled 6765's T3 .82 A/R Vband exhaust with an H ported cover. According to Precision they are 900+ HP turbo's My single Precision 88 was rated for 1400+
All I have for build pictures so far is the manifolds bolted to a junk yard mock up motor I picked up:
heres the 1/4 thread... http://www.lightningrodder.com/forum/showthread.php?t=54108
heres the original build thread...
http://www.lightningrodder.com/forum/showthread.php?t=42509&page=2
and link to the vids...
fuck.
http://www.streetfire.net/video/casey02l-new-pb-twin-67s_2082785.htm
i wanna trap 120 in the 1/4... let alone the 1/8th...