6 hours to try and talk me out of buying a Fusion

Kensington

TCG Elite Member
TCG Premium
Aug 14, 2017
11,312
5,353
Flex was showing signs of imminent death, got it to Carmax and off-loaded it. Moved up my timeline on buying a car to "I NEED A CAR NOW".

I had boiled my search down to Fusions, but you have about 6 hours (4ish PM) to try to convince me to get something else, or I'm going to get the one in the link

https://www.carmax.com/car/16958170

Requirements
$20K limit
Apple CarPlay
30+MPG Highway
Warranty-able
Cooled seats are highly preferred if leather
2WD preferred but not required

And go...

Thanks guys
 

Kensington

TCG Elite Member
TCG Premium
Aug 14, 2017
11,312
5,353
Only on tcg

Absolute lad

Could've just blown out a seal, but I really didn't want to dig any deeper. I had gotten everything I needed to out of the car, and would've been traded in sooner, if not for the wedding.

EDIT: https://www.fordflex.net/forums/viewtopic.php?t=8904

Looks like vent tube or seal blow. My leak wasn't nearly that bad, a couple little drops on the garage over night, and very little under the hood. No driveability issues whatsoever.
 

DEEZUZ

NO PUKESTERS
TCG Premium
Nov 20, 2008
82,315
94,402
NWI
Could've just blown out a seal, but I really didn't want to dig any deeper. I had gotten everything I needed to out of the car, and would've been traded in sooner, if not for the wedding.

EDIT: https://www.fordflex.net/forums/viewtopic.php?t=8904

Looks like vent tube or seal blow. My leak wasn't nearly that bad, a couple little drops on the garage over night, and very little under the hood. No driveability issues whatsoever.

Lol I get it, but now we can add to our reason to sale cars on tcg


-needs tires
-needs oil change
-wind noise @ 150 MPH
-I seen a charger
-I seen a challenger
-blown cv boot
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Sep 12, 2008
26,148
31,258
Elgin
"but muh window molding"

Funny you should mention that. I replaced mine this weekend.

$12 for each moulding, 15 minutes total time to replace and could really be 5 if you're not anal about blowing out the track and cleaning that portion of the windshield that it covers...

Seriously pop out old, push new moulding in... Eazy peazy.

And one thing I was enjoying yesterday while tinkering around with it, now that I have that RotoFab on there, you can sit in the damn engine bay and work on the fucking thing. Seriously! Stupid simple and stupid easy to work on anything in that engine bay.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info