which skinnies to go with my slicks?

[syP]

I will be running a 28" Bias Ply Slick in the back.. My thoughts are to go 28" Bias Ply front runner to avoid massive sway at 130mph+ at the track. Some say just go with a 26" Front, cheaper, lighter.. etc. Now, I will NOT be running these on the street.. strictly a track setup. Will there be any issues running a 26 front with a 28 rear (speedo is read off the rear tires) assuming traction control is turned off? I also dont want to have any braking issues at higher speed at the track as well (think: ABS)

thoughts?

Click to read more...

 

[OffshoreDrilling]

i wouldn't have bought those skinny wheels for such a heavy car in the first place. No bueno.

but, bias ply 28"

you're going to fuck with the suspension geometry being different with two different tires sizes street vs track. Can only set it up for one.

 

[syP]

Hey. I figure if all the camaro guys do it at 4200lbs and g8 guys do it at 4050lbs.. I'll be ok at 3900lbs .

These are the exact wheels the camaro group runs.

 

[Shibby50]

I run a 26inch radial in the front with my 28 in the rear. As stated it could throw off your geometry a bit but I had no problems myself.

 

[Great White Drake]

Do the 28". Don't get anything less than a 4-ply.

 

[syP]

like my toilet paper?