Need to find a Ford tuner

[Smokinhot]

I know Han at Deans, but who else is out there?

My buddy bought an 08 Roush F-150 Nitemare a few month back and wants to pulley down. Problem is, they locked the computer so he needs to get a new one and have it retuned.

Click to read more...

 

[Smokinhot]

Who would u recommend anyway?

 

[Mook]

Tim Barth. /thread

Email: [email protected]
Address: 601 West Jefferson Street Rockford, Illinois 61103
Phone Number: 815-636-2784
Cell Number: 815-721-2183

 

[greasy]

Han's does not tune as far as I know, Kurgan does tuning out of Han's shop. I would say either Barth or Kurgan for sure. Are you sure there is not a chip plugged into the computer? I could not load a tune on my Cobra from my SCT X/Cal until I pulled the Diablo chip physically from the CPU.

 

[Mook]

I'm also not entirely sure Tim is still at Norm's. His email has changed. In fact, googling his office number brings up a different business.

Can anyone comment to that?

 

[RedBeard]

Tim Barth. /thread

Email: [email protected]
Address: 601 West Jefferson Street Rockford, Illinois 61103
Phone Number: 815-636-2784
Cell Number: 815-721-2183

This

 

[greasy]

I'm also not entirely sure Tim is still at Norm's. His email has changed. In fact, googling his office number brings up a different business.

Can anyone comment to that?

Tim is still at the same location in Rockford, but they are back to their original name Modular Powerhouse.

http://www.modularpowerhouseracing.com/contact.html

https://www.facebook.com/pages/Modular-Power-House/486335334731434

 

[Mook]

That answers that.

 

[Smokinhot]

Cool, thanks

 

[blck10th]

Tim owns modular powerhouse. He runs mr norms for someone last I knew. I met the guy he has tons of cars and is a cool older guy. They are in the same building


Tim tuned my car and I love it

 

[Teege24]

Tim is your best bet! when i was there last he said he is no longer associated with Mr. Norms garage in any way

 

[Shawn1112]

Tim is your best bet! when i was there last he said he is no longer associated with Mr. Norms garage in any way

You are correct sir.

 

[wolfe]

Another vote for Tim. Unfortunately he doesn't do my platform even though I tried talking him into it, but after seeing how he has treated a few of my friends and the work they have gotten from him I wouldn't hesitate taking my car up there or referring someone up there.

 

[Smokinhot]

Han's does not tune as far as I know, Kurgan does tuning out of Han's shop. I would say either Barth or Kurgan for sure. Are you sure there is not a chip plugged into the computer? I could not load a tune on my Cobra from my SCT X/Cal until I pulled the Diablo chip physically from the CPU.

Not sure Jim. Don't really know ford platforms. GM stopped using chips after 98 i believe in there trucks.

Roush has a YouTube video on the truck and i was checking out there site and reading up on it.

http://www.roushperformance.com/vehicles/f150-2008-nitemare.html

It says a Roush calibrated ECM.

 

[Smokinhot]

And i found this

http://www.musclemustangfastfords.com/features/mmfp_0806_roush_f150_nitemare/viewall.html

I guess the tune is mild because of the warranty

 

[greasy]

Not sure Jim. Don't really know ford platforms. GM stopped using chips after 98 i believe in there trucks.

Roush has a YouTube video on the truck and i was checking out there site and reading up on it.

http://www.roushperformance.com/vehicles/f150-2008-nitemare.html

It says a Roush calibrated ECM.

It is probably a chip. Find out where the CPU (mine was in the passenger side kick panel) and see if there is a physical chip.

 

[SRT41320]

ive dealt with Mike Post in the past (mpdynotune or something) hes in Byron IIRC

 

[Jokerzl]

Need to check this out