who is using what for a wideband?

[Yaj Yak]

just as the title states...

what are you using for a wideband?

Click to read more...

 

[OffshoreDrilling]

I used to use an innovate LC1, liked it very much. Its for sale if you are looking.....

 

[Novak94]

AEM UEGO its easy to read and very accurate

 

[Mook]

aem uego ftw

 

[MuffHugger]

AEM

 

[SleeperLS]

Innovate LC-1 with the XD-16 gauge, fully custom settings, parameters, and colors for the gauge. Easy to re-calibrate

 

[Lord Tin Foilhat]

Innovate LC-1 with the XD-16 gauge, fully custom settings, parameters, and colors for the gauge. Easy to re-calibrate

x2

 

[M@]

PLX SM-AFR

 

[KaMaSuTrA]

AEM UEGO

 

[Dasfinc]

AEM UEGO its easy to read and very accurate

X2, I had one of these on my hatch, Easy to read, accurate, easy to wire/setup, Datalogging abilities, and can be had very VERY cheaply new or used.

 

[PANDA]

AEM

 

[Smokinhot]

PLX SM-AFR

x2 although i hadn't hooked it up yet. My bro uses it, and its great

 

[esteinmaier]

AEM has worked well for me, but I'd strongly advise against using it with leaded race gas. The sensor won't last long.

 

[M@]

x2 although i hadn't hooked it up yet. My bro uses it, and its great

yeah, the added features it has are pretty trick...

I'm not currently using it's simulated narrowband output, but I'm strongly considering it.

 

[Smokinhot]

my bro has it wired as a narrowband. i'm considering doing it aswell

 

[bikrboy128]

so explain this simulated narrowband the PLX SM-AFR has. does it simulate the stock O2 sensor so you dont have to drill another hole in your exhaust?

 

[Smokinhot]

so explain this simulated narrowband the PLX SM-AFR has. does it simulate the stock O2 sensor so you dont have to drill another hole in your exhaust?

yes

 

[PANDA]

simulated narrowband O2 sucks

 

[Smokinhot]

simulated narrowband O2 sucks

to each's own

 

[Chrisco]

AEM has worked well for me, but I'd strongly advise against using it with leaded race gas. The sensor won't last long.

speaking of which, do you know the part number for a replacement sensor?


I'm using the AEM UEGO, but if I were to purchase another I'd get the Innovative LC-1

 

[SRT41320]

AEM right now...but will switch to plx/innovative when built motor goes in

 

[M@]

simulated narrowband O2 sucks

Who told you that?

...as I'm sure you're commenting based purely on hearsay, rather than any actual personal experience...

 

[PANDA]

Who told you that?

...as I'm sure you're commenting based purely on hearsay, rather than any actual personal experience...

Thats what I was reading... I think Tommy Gloves had a bad expressed with it also. Was it you who told me Tom?

 

[M@]

And I've talked to Tim DeNike (roadracer on clubgp) about it, and he used the PLX narrowband output with great results. Tuned his car off of it and ran very low 12s non-intercooled.

I'm gonna run with his word, and the fact that most people who use the PLX use it's simulated narrowband without issue.

 

[Yaj Yak]

speaking of which, do you know the part number for a replacement sensor?


I'm using the AEM UEGO, but if I were to purchase another I'd get the Innovative LC-1

its just a bosch wideband o2 sensor from what i gather...

http://www.aempower.com/ViewCategory.aspx?CategoryID=67