? on WB through the A/C pressure switch

[SleeperLS]

I am trying to hook up my HP tuners to my Innovate wideband. I hooked everything up(WB output 2 to the red wire on the A/C pressure switch) and made the changes to HPT, but there is no signal coming to HPT. Once HPT connects, the WB option goes away on my table display. Anyone have any ideas? Thanks, Andy C.

Click to read more...

 

[smug]

I have never heard of using that A/C pressure switch......I have heard of using the EGR.

 

[M@]

use the EGR, easier...

 

[SleeperLS]

alright, anyone know the process of using the EGR? A detailed write-up or info on it would be crucial. I used to have one on my car, but took it off when I got the swap. I am pretty positive the sensor plug is chillin near my rear injectors. Really, at least just let me know what wires need to go where...I will figure it out. Thanks

Edit: Do I just hook up the brown wire from my LC-1 to the brown wire of the EGR harness? My EGR is unplugged, so does that matter? I believe I have made the correct changed to my PID in HP tuners, so I will just have to change it from AC pressure sensor to the EGR code correct?

 

[SleeperLS]

bumperooski :nanadance:

 

[02BlueGT]

http://forums.corvetteforum.com/c5-...and-via-egr-or-a-c-pressure-in-hp-tuners.html

Here you go

 

[SleeperLS]

thanks, that is what I used to hook up through the AC switch...maybe I can re-analyze some crap and figure it out.

 

[Yaj Yak]

search on the hptuners forum... there is some really good step by step info for how to do it that i was reading the other day.