How much PAH??

[rocket69GTP]

How much power can be made on a Z3 turbo kit with 65lb injectors with the following modifications and changing out the rockers for a cam setup?

Z3 Turbo Kit
-Borg Warner 56mm turbo
-TiAL 38mm wastegate kit
-TIG welded 304 stainless steel crossover
-TIG welded 304 stainless steel 2.5" downpipe
-Oil feed and return system
-High temp silicone connectors
-K&N air filter
-Crankcase breather
-Autolite 103 plugs
Rear o2 Added to DP
65lbs Injectors
Manual Boost Controller
2-1/2" Intercooler Piping from CXRacing
Couplers from CXRacing
2-1/2" Aluminum BOV Flange
Ripoff Greddy Type RD BOV
SpeedDaddy Intercooler 32" x 12" x 4"
BadlanzHPE SS Electric Exhaust Cutout
BadlanzHPE SS Cutout Y Pipe
BadlanzHPE SS Clamps
TOG SS Catless DP
TOG Catted DP for Emissions
Dynomax Ultra-Flo Welded Mufflers
ZZP SS PLog
ZZP HV3
ZZP 10.3 Wires
Yella Terra 1.84 Roller Rockers
Yella Terra Pushrods
ZZP Powder Coated Covers in Translucent Red
DEI Titanium Turbo Blanket
DEI Titanium Wrapped Plog/Crossover/DP

Click to read more...

 

[Bob Kazamakis]

597whp probably

 

[SleeperLS]

haha, funny guy. Supposedly the older z3 kit can hit 400whp+ without too much issue.

 

[rocket69GTP]

This is on stock heads?

 

[10sec]

56mm turbo will be the weak link in that setup. I'd say 400hp, maybe not quite 400whp though.

 

[SleeperLS]

yeah. To my knowledge ported heads don't have too much impact on lower hp turbo 3800's. I have that turbo and asked some questions to zzp and a couple other folks. It will max at about 18-20psi which I don't think calls for heavily ported stuff.

 

[rocket69GTP]

Do they run a T3/T4 flange with this setup to upgrade it to, I don't know, maybe something larger?

 

[SleeperLS]

56mm turbo will be the weak link in that setup. I'd say 400hp, maybe not quite 400whp though.

at: I dunno why I read stattama cam in there. I don't know much about turbo set-ups so I would agree with 10sec given that set up just has rockers

 

[SleeperLS]

The end all stattama t67 will do work. I dunno jack about flanges though

 

[The Broken Regal]

depends on the cam, st2 and above, on race-gas I'd say low 400whp

honestly though, if thats a bunch of crazy upgrades, I'd just get a z7 kit with the T67, make your own IC... should be the same amount of money in the end, maybe less, seriously

on a stock engine with 130s you could make probably 400whp or similar, AND you will have a ton of room above and beyond! with the z3 kit you'll be maxed out

 

[10sec]

Isn't there an option for larger turbo's or "extended" tip turbos? The 56mm CT kit turbo barely made 300whp, given it was on a stock junk car, but i would expect it to run out of pah after 350whp.

 

[rocket69GTP]

I apologize for all of the questions but Victorsmalls just put his ride up for sale and I am trying to get ahold of the turbo kit. He broke his input shaft and doesn't want to bother fixing it?!?!?

There is an option on zzp's website for one but I just wanted to upgrade the turbo if possible since I knew it would be the weaker link in the setup.

 

[10sec]

Damn, all that work on that car and he doesn't want to change the i/s? Weak. I would snag that kit though, his dumb decision = your win.

 

[rocket69GTP]

Oh, this is all Mook's fault too.

 

[10sec]

Mook has switched to the dark side, and will never go back. It's the best decision anyone can make to mod a 3800. You have the potential for an 11sec car without doing anything but bolting on the kit and tuning it.

 

[rocket69GTP]

^^^That's what I am talking about. Mook's car is the inspiration for this upgrade.

 

[10sec]

Just bolt on slow junk

 

[Mook]

Oh, this is all Mook's fault too.

^^^That's what I am talking about. Mook's car is the inspiration for this upgrade.

 

[10sec]

You're so ghey

 

[rocket69GTP]

I wondered what was taking him so long to post.

 

[SleeperLS]

haha, funny photoshop

 

[Handsome Jesus]

I sense there will be perpetual swinging involved with mooks car. everyone is ing

 

[Bru]

Wow. $5500 for the entire car. I'd just buy the whole damn thing.

 

[Turbocharged400sbc]

.... and hack it up for an 80e

 

[rocket69GTP]

^^^Hmmmm, how hard would that be to pull off?