trans mount part number

[frosty23_45]

Looking for the part number for a solid trans mount?

I found the Anchor 2172SR on Oreilly, but it looks way different than the one ZZP sells. Just wondering if they are basically the same?

Gonna replace the motor mount as well, but found a solid one on amazon. Westar EM2796S

Those look like they would work?

Click to read more...

 

[jbigalow]

None of the "solid" mounts are actually solid wand will sag...just get a standard hydraulic mount (a lot of the newer motor mounts are water filled)
Or drill drain and fill with rtv or urethane and let em cure for a couple weeks I only have a filled motor mount on the shelf but I have a couple good used oem trans mounts
Dammit it's me James t400sbc

Fuckn iPad pos

 

[skeezer]

RockAuto

ANCHOR Part # 2712 (trans mount)
ANCHOR Part # 2796 (motor mount)

5% discount code here:

http://www.thechicagogarage.com/forum/showthread.php?t=48070

 

[frosty23_45]

thx guys, now can I make both mounts "solid" from filling them with the urethane?

James, shoot me a pm if ya wanna about the mounts you got

 

[Turbocharged400sbc]

yeah just buy the cheepest mounts you can find...drill em, drain em, blow em out/brake clean em (esp if its filled with oil vs water) grab tube of windshield urethane....let it sit in some hot as hell water (much easier to pump into the mount) then fill and let cure for a couple weeks...

i only have a filled motor mount thats fully cured and im guessing your not gonna want to drive all the way up here just for one when you need both

 

[frosty23_45]

right, so you've never filled the tranny mount? Would it be worth it?

 

[Turbocharged400sbc]

oh ive filled em...i got one here but it's rich17's...well worth it

 

[frosty23_45]

Just ordered my mounts, thx guys.