I
imported_FastKatt
Guest
I don't get to look at time slips alot (been over 10 years since I've been to the track)
I wanted to post a few runs, and see what people had to say about them
Here goes:
3 important runs from day 1 10/21/07:
11:23am
R/T: .468
60': 2.200
330: 5.960
1/8: 9.059
MPH: 79.13
1000: 11.716
1/4: 13.996
MPH: 98.66
6:00pm
R/T: .037
60': 2.273
330: 6.059
1/8: 9.146
MPH: 82.05
1000: 11.824
1/4: 14.088
MPH: 97.75
6:18pm
R/T: .106
60': 2.278
330: 6.051
1/8: 9.160
MPH: 78.41
1000: 11.821
1/4: 14.093
MPH: 99.09
All 3 runs:
Street tires, 3.4 pulley, 2gal 110 on top of less than 1gal of 93
3 important runs from day 2 10/28/07:
11:56am
R/T: .166
60': 1.882
330: 5.499
1/8: 8.506
MPH: 83.32
1000: 11.112
1/4: 13.328
MPH: 100.17
Slicks, 3.4 pulley, 3gal 110 on top of just over 1gal of 93
4:23pm
R/T: .060
60': 2.027
330: 5.617
1/8: 8.593
MPH: 82.88
1000: 11.160
1/4: 13.348
MPH: 102.68
5:14pm
R/T: .265
60': 2.002
330: 5.564
1/8: 8.517
MPH: 84.66
1000: 11.089
1/4: 13.274
MPH: 101.18
Slicks, 3.2 pulley, 3gal 110 on top of just over 1gal of 93, after lunch
1st day I tried to scan, but DHP 1.2.4 failed me
2nd day couldn't get laptop b4 I left for the track
I had a few 1.4ish blips of KR with the 3.4 (Aeroforce gauges) both days
When I switched to the 3.2 the 2nd day I saw a blip of 2.x KR on 2 runs (Aeroforce gauges) but you can't look 100% of the run
Besides the lack of traction on day one, are these times I should be seeing with my mods?
I'm very happy with both days, and just want to be sure it's not misplaced
Short of yelling at me for running the 3.2 without a scanner hooked up
(Thinking JerryH or Eddie-98GTP might be thinking of it)
Anyone have any thoughts?
Did I mention I'm PLEASED As Hell with my runs :drunk: