Im trying to get some stuff out of my house before i move out and i also need to fund a new trans. All prices do not include shipping. Please keep the messages in this thread. No pms because my box always ends up full. Please ask for pics if u need them. Most prices are firm for now. I will try to check this post daily.
Brand Felpro head gaskets in packaging. 50+shipping
Brand new Gm crank bolt in bag still 5+shipping
Rocker bolts and Valve cover gaskets In packaging 30 +shipping
Brand new in packaging plastic lim gaskets 35+shipping
Brand new 7 inch k&n filter with 4inch opening(its a little bent up but clean and will work just fine)
30+shipping
45 degree bend perfect for fwi 4inch in 8+shipping
Ported blower for turbo Ported by 98gtptoy 75+shipping 100+shipping with matching lim
Redone heads with fresh 3 angle valve job, hot tank cleaned, new valve seals, checked for cracks and were ok, milled .003 for straightness 200 local pickup only for now(perfect for top swap or homeporting)
3.2, 3.0 pullies ZZP/Intense both sold
Snout with good coated rotors and zzp mps 100+shipping
(worked good when taken off)
Clean 97 fuel rail with no silencer 10+shipping
79k l67 injectors with new upper O rings 40+shipping obo
Stock 97 tips 10+shipping
Stock corner lights(one is brand new) 20+shipping.
I also have a set of stock manifolds and 2 complete sets of rockers and pedistals, a set of lifters, set of pushrods if anyone is intersted in that stuff. Im not sure what its worth so if your intersted ill post a price.
For local people i also have a rebuilt l36 short block minus balancer that has new clevite bearings, and new gaskets for the lower half. Does not have a cam in it currently but i still have the stock cam if intersted. It has stock rings but i honed the cylinder walls. The cylinders showed little wear. Their was almost no lip at all. If anyone is intersted u may pm me about this one. Im not posting a price because i dont know what its worth. Make a good offer on it and pick it up and we could have a deal. I might be able to get a balancer for this if needed. This was all done by me at school.
Brand Felpro head gaskets in packaging. 50+shipping
Brand new Gm crank bolt in bag still 5+shipping
Rocker bolts and Valve cover gaskets In packaging 30 +shipping
Brand new in packaging plastic lim gaskets 35+shipping
Brand new 7 inch k&n filter with 4inch opening(its a little bent up but clean and will work just fine)
30+shipping
45 degree bend perfect for fwi 4inch in 8+shipping
Ported blower for turbo Ported by 98gtptoy 75+shipping 100+shipping with matching lim
Redone heads with fresh 3 angle valve job, hot tank cleaned, new valve seals, checked for cracks and were ok, milled .003 for straightness 200 local pickup only for now(perfect for top swap or homeporting)
3.2, 3.0 pullies ZZP/Intense both sold
Snout with good coated rotors and zzp mps 100+shipping
(worked good when taken off)
Clean 97 fuel rail with no silencer 10+shipping
79k l67 injectors with new upper O rings 40+shipping obo
Stock 97 tips 10+shipping
Stock corner lights(one is brand new) 20+shipping.
I also have a set of stock manifolds and 2 complete sets of rockers and pedistals, a set of lifters, set of pushrods if anyone is intersted in that stuff. Im not sure what its worth so if your intersted ill post a price.
For local people i also have a rebuilt l36 short block minus balancer that has new clevite bearings, and new gaskets for the lower half. Does not have a cam in it currently but i still have the stock cam if intersted. It has stock rings but i honed the cylinder walls. The cylinders showed little wear. Their was almost no lip at all. If anyone is intersted u may pm me about this one. Im not posting a price because i dont know what its worth. Make a good offer on it and pick it up and we could have a deal. I might be able to get a balancer for this if needed. This was all done by me at school.
