These are prices WITHOUT shipping, me and Denise go to Chicago area about once a month so we could bring the parts (except for the tranny) or you can pay for shipping, all of this stuff will be off of the car next weekend.
Fastman 97 GTP throttle body with MAF block off plate (72.5MM opening)($250 No core needed)
http://www.cardomain.com/member_pages/show...274_21_full.jpg
http://www.cardomain.com/member_pages/show...274_22_full.jpg
-WPI xtreme IC gen3 M90 (no rotors or snout, just the housing) ($300 no core needed)
-PRJ AC delete ($40)
-SLP LS1 85MM MAF (this is a 5 wire sensor w/MAF and IAT sensor)($75)
-17” panther rims wrapped in Marshall Matrac tx 245/45ZR17 tires (these are actually kumho tires with Marshall name branded on them) ($550) (these fit the w-body bolt pattern)
http://www.mnclubgp.com/forum/garage.php?m...mp;image_id=378
-Intense MPS hub and 3.0" SC pulley ($75)
-ATI SFI dampner for L67 (stock size) ($250)
-Intense SRC ($30)
-Happy knob ($30)
-Transmission, I would be willing to seperate but would need a transmission to replace mine (something compatible with a 2001 monte carlo SS in good shape) + $1,500. (The transmission if a full out build from dynotech w/3.69 gears, hardened input shaft, shift kit, heavy duty 4th clutch shaft, improved boost valve and sleeve, pawl style input and sprag, tightened up clutch tolerances, etc. )
Custom L36 valve covers ($50): They have some wear and are not perfect, but they look great.
L67 stock dampener ($25)
L36 stock dampener ($20)
L67 coil pack bracket ($10)
Stock thermostat housing ($10)
Stock water pump pulley ($5)
ZZP M90 snout turndown tool ($50)
L67 idler pulley bracket ($10)
Fastman 97 GTP throttle body with MAF block off plate (72.5MM opening)($250 No core needed)
http://www.cardomain.com/member_pages/show...274_21_full.jpg
http://www.cardomain.com/member_pages/show...274_22_full.jpg
-WPI xtreme IC gen3 M90 (no rotors or snout, just the housing) ($300 no core needed)
-PRJ AC delete ($40)
-SLP LS1 85MM MAF (this is a 5 wire sensor w/MAF and IAT sensor)($75)
-17” panther rims wrapped in Marshall Matrac tx 245/45ZR17 tires (these are actually kumho tires with Marshall name branded on them) ($550) (these fit the w-body bolt pattern)
http://www.mnclubgp.com/forum/garage.php?m...mp;image_id=378
-Intense MPS hub and 3.0" SC pulley ($75)
-ATI SFI dampner for L67 (stock size) ($250)
-Intense SRC ($30)
-Happy knob ($30)
-Transmission, I would be willing to seperate but would need a transmission to replace mine (something compatible with a 2001 monte carlo SS in good shape) + $1,500. (The transmission if a full out build from dynotech w/3.69 gears, hardened input shaft, shift kit, heavy duty 4th clutch shaft, improved boost valve and sleeve, pawl style input and sprag, tightened up clutch tolerances, etc. )
Custom L36 valve covers ($50): They have some wear and are not perfect, but they look great.
L67 stock dampener ($25)
L36 stock dampener ($20)
L67 coil pack bracket ($10)
Stock thermostat housing ($10)
Stock water pump pulley ($5)
ZZP M90 snout turndown tool ($50)
L67 idler pulley bracket ($10)