3800 Tons of stuff

[BumpinGTP]

I am moving soon and don't feel like packing all this stuff up to move it to my new place just to bring it there and take up space. All parts can either be picked up at my place in Bensenville, my shop in Joliet, delivered for a small charge, or shipped for actual shipping costs.

Complete 90k L67 - $750
4t65HD trans 90k - $450
Autometer carbon fiber trans temp gauge - $35
Dynabatt lightweight race battery - $75
Dynabatt mounting bracket - $35
L67 bare block - $25
Stock differentials - $180 each
Differential covers - $30 each
Output shafts - $25 each
Driver side half shaft - $50
Stock 60k struts with GMPP springs - $150 plus stock struts/springs
Stock 99+ airbox - $30
K&N filter for 99+ stock airbox - $25
L67 harmonic balancer - $30
L67 front cover - $50
L67 wiring harnesses - $75 each
L67 fusebox - $45
Cruise control module - $50
Crossbraces - $8 each
00 GTP PCM - $75
98 GTP PCM - $75
Stock waterpump - $25
Ported LIM - $100
97 GTP fuel pump - $60
Modified fuel rails - $50
Stock L67 injectors - $75
Dogbone motor mounts - $15 each
Aluminum driver side motor mount bracket - $20
Coil pack bracket - $25
Stock coil packs - $10 each
Ignition control module - $30
ICM harness - $20
Stock cams - $10 each
Power steering pump - $30
Strut tower brace - $10
Custom fiberglass center console dual gauge pod - $75

Click to read more...

 

[imported_PaceCarBoozer]

condition of the trans? Ever had it in the car running? Essentially, do you know if it was beat on?
CJ

 

[Sinister Drag Designs]

is that the block i was supposed to get from you?

 

[BumpinGTP]

condition of the trans? Ever had it in the car running? Essentially, do you know if it was beat on?
CJ
[/b]

I got the motor and trans from Morad about a year ago but never ran it. The vast majority of card he gets are not beat on so I would assume it to be perfectly fine.

is that the block i was supposed to get from you?
[/b]

I thought you want the one with the chipped pistons? I got all confused about who wanted what. If you still want the chipped pistons one it is free if you pick it up because I don't know the condition of internals. The bare block I am charging a little bit for because I know it is in good shape.

 

[Sinister Drag Designs]

ill take the bare if you have a crank you can throw in for the price?, could you drop it off at voyteks on your way to work?throw you a couple bucks for delivery.

 

[BumpinGTP]

I don't have a spare crank, but what I can do is give you the one with the chipped pistons too and you can dissassemble it and use that crank. I would have to go to my parents to get them and then head out there. I can bring both for $50.

 

[Sinister Drag Designs]

I don't have a spare crank, but what I can do is give you the one with the chipped pistons too and you can dissassemble it and use that crank. I would have to go to my parents to get them and then head out there. I can bring both for $50.
[/b]

thats fine, let voytek know when you can do it

 

[BumpinGTP]

K, I will call him tomorrow afternoon.

 

[BigJermGTP]

More info on the strut tower brace please....$10?

Front or rear? Brand? Condition?

Thanks,
Jeremy

 

[BumpinGTP]

It is a GMPP front bar. It is is great shape. It has only been on the car about a month.

 

[superchargedgp]

i'll take the gmpp front strut tower brace

 

[3800SC98]

I'll take the PS pump, and let me know where I can pick it up.

 

[BumpinGTP]

Which is closer for you? Bensenville or Joliet?

 

[SaturdaysGS]

Are you willing to seperate the springs from the struts?? If so, would you consider a trade of SLP springs for the GMPP plus some cash?

 

[3800SC98]

Which is closer for you? Bensenville or Joliet?
[/b]

Both are far. Can you ship it?

 

[BigJermGTP]

PM sent Bumpin,

I slacked....is the strut tower brace still up for grabs, I'll pick it up

 

[3800SC98]

Bumpin,

Sent yah a PM. Let me know if you're able to do it or not.

Thanks.

 

[BumpinGTP]

PMs replied to.

 

[Sinister Drag Designs]

anytime you want to drop those off let voytek know,he has money in hand

 

[endless36]

PM sent

 

[BigJermGTP]

PMs replied to.
[/b]

?.....not me....?

*tear*

I know your busy, try and let me know either way, I'm interested in the strut bar.

 

[BumpinGTP]

anytime you want to drop those off let voytek know,he has money in hand
[/b]

Ok, I left you a voicemail Friday night. Sorry I couldn't answer when you called, phone was about to die.

Big Jerm - STB is gone, sorry.

 

[Sinister Drag Designs]

thats fine, we are trying to organize the garage and want to get those on stands
thanks

 

[BumpinGTP]

TTT