3800 Does my Boost for Mods seem Right?

[JJ91284]

My mods are listed below, and I'm getting around 6.5 psi all the way up to 80 mph. I should probably be at 8-10 psi, so I'm assuming I have a vac leak somewhere, does this sound correct?

I have used my aeroforce 2 scanner, and my snap on scanner and I come up with the same boost. All this with no KR to.

Click to read more...

 

[CoolGTX]

sounds like your d/p is leaking to much boost.

 

[Sinister Drag Designs]

well if you are running no cat(or hiflow) along with pems and a stock intake that might be right
let that thing breath a little

 

[SaturdaysGS]

Seems to low to me..

 

[GTPquickRB]

yeah you're way low - in fact i've never heard of a GTP running anything under 7 PSI at WOT (except mine runs 0 psi with the belt off ) Get that sucker looked at, or throw on a 3.4

 

[Sinister Drag Designs]

faulty BBV. it might be leaking or releasing presure early
wouldnt hurt to check

 

[JJ91284]

Whats a good way to determine if the BBV (Boost Bypass valve) is leaking?

I still have my crappy 97 intake on since I'm building a gtx hood (I just fiberglassed the scoops, just need some fairing of the scoops now). I'm trying to figure out how to make this a true ram air setup, however with the space in their I dont know if its plausible. If I can't figure out how to make the design work out, I'll just run the ram air to the box then. So I suppose the stock intake is limiting the air to the supercharger, or making it extremely hard to breath.