Hey,
So I installed a walbro pump before i had a CT turbo kit put on. So two days ago im leaving work and i start to get on the throttle and poof! the car shuts off!?!
I push it back to my work and check fuses, I have a caspers hot wire kit on the car. all fuses and connections are good so i go to the pump... i pull off the three wire connector and with key on engine off i get 5v. i was wondering if this was a five volt refrence and if anyone knows what voltages i should get from the pins on the connectors. I bought the Walbro pump not used but from someone on this site. i drove the car 900-1000miles and it takes a dump on me so i was just a bit unsure if it was the pump. Any input is appriciated!!!<--not sure if thats spelled right
So I installed a walbro pump before i had a CT turbo kit put on. So two days ago im leaving work and i start to get on the throttle and poof! the car shuts off!?!
I push it back to my work and check fuses, I have a caspers hot wire kit on the car. all fuses and connections are good so i go to the pump... i pull off the three wire connector and with key on engine off i get 5v. i was wondering if this was a five volt refrence and if anyone knows what voltages i should get from the pins on the connectors. I bought the Walbro pump not used but from someone on this site. i drove the car 900-1000miles and it takes a dump on me so i was just a bit unsure if it was the pump. Any input is appriciated!!!<--not sure if thats spelled right