3800 Mod Day Help List

[Mike K]

Gentleman (and ladies if there are any insane enough to still be here). This post will list out all the various mods being done at the mod day. If you don't have a mod yet planned or don't know if you'll be working on your car don't worry. You don't have to be on this list to get your car worked on. It's just going to help us, as a club, be a little better organized at the event.

If you need work performed please post in the following format:

Name:
ILGPC Username:
Work Needed:
Parts Available (I.E. if you're doing a pulley swap are you bringing a pulley puller?):

We'll compile a list of necessary parts and have a list at the mod day so that people can be better organized.

Please Note: The intention of this post is ONLY to obtain information on what work people need to be done. Please limit posts in this thread to the above format.

Click to read more...

 

[imported_1fastGTP]

Shaun
1FastGTP
wbs shift kit, wbs mps system, and might be one other thing
will be purchasing this off of u guys thursday so i just bring it with to mod day correct?

 

[tonys99gtp]

Tony Ramirez
tonys99gtp
maybe pems,would like a tune if possible.
I will be bringing large c clamp,torque wrench,torque angle meter, lots of other tools to help everyone out.

 

[MIKES3]

Mike Costello
MIKES3
S&S Header, New IC, MPS
I have tools & aircompressor (No Air Tools )

 

[syP]

Ryan Angellotti
syP
tune tune tune... Will also bring my other snout with a 3.8" just incase we cant get rid of my KR

Im bringing my 192pc tool set to use.

 

[beyerch]

Charles Beyer
beyerch

Haha if there's time i have ...

Rotors x 4
Brake pads X 4
caliper paint
struts (already have springs / strut mounted and ready to install)
flush brake fluid
Alternator
Valve cover gaskets
tensioners
belts
plugs
wires
flush dex-cool and put in normal coolant
oil change
swap out random parts with newer versions (dog bones, etc)

i'm forgetting stuff too...

 

[Sinister Drag Designs]

bob
sinr247
tuning and need a pully hub removed, maybe a shift kit if anyone can help do one
i dont have a puller

 

[ThaLord]

Name: John
ILGPC Username: Thalord
Work Needed: Back Massage by a hot chic
Parts Needed: Case of Root Beer would be nice.

 

[smknL67]

Name: Francisco Torres
User name: SmknL67
Work Needed: 3.4 pulley install and pac swix module intall
tools, I have tools but no puller

 

[Blownbyyou]

adam
blownbyyou
"maybe a 3.4 pulley" and tuning with my the afc
i dont have a puller but I have a big ass toolbox of tools if someone wants to bring a pickup, in all honesty I have alot of tools just let me know what I should bring!

 

[Ricky Gonzalez]

Ricky Gonzalez
Ricky Gonzaelz
dont need any work done
i can bring tools, strut spring compressors, extension cords, welders, jack & jack-stands and a pair of hands to work. if anyone wants to bring "root" BEER they will be priority 1 :lolsign:

 

[MIKES3]

Originally posted by Ricky Gonzaelz@May 11 2006, 02:44 PM
Ricky Gonzalez
Ricky Gonzaelz
dont need any work done
i can bring tools, strut spring compressors, extension cords, welders, jack & jack-stands and a pair of hands to work. if anyone wants to bring "root" BEER they will be priority 1  :lolsign:

[snapback]125472[/snapback]​

I hope you like Barq's Root Beer cause I'm down. I will also bring 192 pc tool set as well as a Jack and stands, air compressor. If you can think of anything else let me know

 

[chipmonk212121]

Craig Toepfer

chipmonk212121

PEMs, bolt-on DP, brake pads, i have a DHP, but would rather have someone tune it for me if possible?

I doubt there is any tool I can bring that there wont already 50 of.

I will bring lots of rootbeer! what brand?

 

[evastos]

Name: Armando Luna
ILGPC Username: evastos
Work Needed: A simple tune of the old PCM
Parts Available: none

 

[Ricky Gonzalez]

Originally posted by chipmonk212121@May 11 2006, 04:24 PM
Craig Toepfer

chipmonk212121

PEMs, bolt-on DP, brake pads, i have a DHP, but would rather have someone tune it for me if possible?

I doubt there is any tool I can bring that there wont already 50 of. 

I will bring lots of rootbeer! what brand?

[snapback]125480[/snapback]​

any suggestions im a big fan of the rootbeer brewed in alaska....you know...the one brewed in the ICE HOUSE....that one

 

[chipmonk212121]

Originally posted by Ricky Gonzaelz+May 11 2006, 10:14 PM-->

<!--QuoteBegin-chipmonk212121

@May 11 2006, 04:24 PM
Craig Toepfer

chipmonk212121

PEMs, bolt-on DP, brake pads, i have a DHP, but would rather have someone tune it for me if possible?

I doubt there is any tool I can bring that there wont already 50 of. 

I will bring lots of rootbeer! what brand?

[snapback]125480[/snapback]​

any suggestions im a big fan of the rootbeer brewed in alaska....you know...the one brewed in the ICE HOUSE....that one

[snapback]125533[/snapback]​

[/b]

haha i really mean rootbeer. i wont be 21 until the raceday!

 

[Ricky Gonzalez]

oh :lolsign: ok then..... A&W is pretty good

 

[REDHOTT04GTP]

Originally posted by ThaLord@May 10 2006, 01:11 PM
Name: John
ILGPC Username: Thalord
Work Needed: Back Massage by a hot chic
Parts Needed: Case of Root Beer would be nice.

[snapback]125286[/snapback]​

X'S 2 :lolsign:

 

[REDHOTT04GTP]

Name-Chad Oxendine
UserName-Redhott04gtp
Work Needes-Maybe SLP springs,PCM tune, Maybe sumthing else
Parts Needed-Spring Compresser (Maybe),Ron Vogal (PCM Tune)

I got 362pc tool set i'll bring,And sum 24pks OF A&W Rootbeer

 

[SaturdaysGS]

Name: Nick Carrizales
ILGPC Username: SaturdaysGS
Work Needed: Plugs, MAF screen, FWI, Shiftkit (if were allowed to mess with fluids), Scan-Tune?
Parts Available: Will have plugs, MAF screen, FWI materials, and Shiftkit/fluid to do what I need, and some tools available to use for others.

 

[Mike K]

Originally posted by beyerch@May 10 2006, 12:59 PM
Charles Beyer
beyerch

Haha if there's time i have ...

Rotors x 4
Brake pads X 4
caliper paint
struts (already have springs / strut mounted and ready to install)
flush brake fluid
Alternator
Valve cover gaskets
tensioners
belts
plugs
wires
flush dex-cool and put in normal coolant
oil change
swap out random parts with newer versions (dog bones, etc)

i'm forgetting stuff too...

[snapback]125281[/snapback]​

Charles, why don't we just do a straight frame-up resto for you? :lol:

 

[Fish]

Mike, will you take manifold cores at the mod day??

 

[chipmonk212121]

im assuming so since he is going to bring my PEMs to the mod day and I selected the ill send you my manifold option today. so just a swap of manifolds for me i guess

 

[smug]

well, I am not sure if I am going to make it out there, money i kinda tight now.
Name: Daniel Erickson
ILGPC user name: 2000gpgt
Work needed: Plugs and tune along with any other mics junk i can think of by then
Parts needed: I can bring lots of sockets, ratchets and about any standard hand tool you can think of. I think Mike S3 said he has a air compressor, so i he brings it i also have a few air tools to bring. 1/4 and 3/8 air ratchet, drills, impact, grinder, cut off wheel, a little saw thing that works good for cutting plastic, air hammer, ect.

 

[phat_ridegt]

Dan Ostby (WILLY)
phat_ridegt
I am in need of a turned down snout. would be nice if someone had a tool to use instead of swapping snouts. if not, i may need a machined snout and my mps pressed onto it. also, i have a new coupler if the snout is needed to be removed