Before I get ahead of my self and buy a unit....My GTP did not have a HUD. Is it possible to buy one and plug-n-play install one or is it a pita hard job? What am I looking at getting myself into?
Take the dash piece off and the gauges and look for the wires. they will be right there. I think they stoped wiring for hud in 99 so you may not have the wires depending on the year. I just added a hud to my 2000 gt a few weeks ago and my car did not have the wires so it took a lot of splicing. It took me about 5 hours to splice all the wires and cut the dash. Take your time cuz u dont want to f-up and be screwed. For some reason i do not have an image but you can here the motor change angles. Before i cut the dash i tested it and i could see inside of it, it worked. then i cut and fit and cut and fit and now it does not work. wierd. I can look inside of it from outside of the car and there is no image. Then i did some testong with a DVOM and i was not getting voltage throught the dimmer part of the switch and i got a new switch comming so i hope it fixes this. If any on has suggestions on what could be wrong with my hud feel free to let me know. Here is a link to the wire diagram i used and i double checked it from the dealer and it looks correct. http://mywebpages.comcast.net/seanvanr/add...WIRING.htmlrect.
Like i said take your time here!
Sorry i did not mean to steal your post